Waching daily May 29 2018

Hey everybody, it's Maddie Sofia

from NPR and Joe's Big Idea,

and we are here at the Smithsonian Conservation

Biology Institute

finding out what it takes

to save the maned wolf.

Known for the characteristic mane on their necks,

the maned wolf of South America is nearly endangered.

This is Dr. Nucharin Songsasen.

She's an expert in the reproductive biology

of maned wolves here in Front Royal, Va.

Maddie: What's the deal with maned wolves?

Nuch: Oh, my God, they are so cool!

You know we call them fox on stilts.

Maddie: Fox on stilts!

Nuch: People call them wolves,

but they're not really wolves.

When you're looking at the canid family

they're a very unique species.

We estimate there's about 20,000 of them left,

mostly living in the grassland habitat in Brazil.

But the reason that we need to

start paying attention to this guy now

is because their habitat is gone.

Eighty percent of these grassland

already disappeared.

Maddie: Wow.

Nuch: And only 5 percent of those natural habitat

that's remaining is protected.

Maddie: That's where Nuch comes in.

She's breeding an insurance, or backup population

of maned wolves that can be reintroduced

to their natural habitat if the wild populations die off.

Maddie: What is your favorite thing

about the maned wolf?

Nuch: Ha-ha-ha, the smell.

Maddie: For our viewers at home,

it is not a good smell.

Nuch: It is a good smell.

Maddie: It smells like skunks.

Nuch: Well a little bit.

Maddie: When you were growing up,

did you think you were going to be a scientist?

Nuch: I grew up in Bangkok, Thailand.

When I was a little girl I want to be a veterinarian,

'cause my father also a veterinarian.

So I want to save animals;

I want to work with animals.

Then when I went to vet school,

I said, "Oh, I want to be a scientist, too."

Merging the two worlds that I love.

Maddie: You want a meatball?

Fish?

You want a grape?

What do you want?

So I just launch it in her direction?

OK, varsity softball.

Maddie: So Nuch,

Nuch: Yes.

Maddie: This is where the reproductive magic happens.

This is your lab.

Nuch: Yes, this is the place.

This is the place, yes.

Maddie: Have you developed wolf Tinder?

What's going on?

Nuch: For the matchmaking aspect,

so what we have is we have a list of male wolves and

female wolves that will have their value that's attached

to them based on their genetics.

Maddie: They have a value?

Nuch: Yeah.

Maddie: These values are based on how

genetically different,

or unrelated, the wolf is to other wolves.

The less related they are, the better.

That's because genetic diversity in a population

helps a species survive.

Remember our buddies Fin and Arvara?

Nuch considered their genetics as well as

their age and health to match them up.

But breeding maned wolves isn't as easy as

just putting two wolves together.

Nuch: They are seasonal breeders,

meaning that they only breed a certain time of the year

and then one time they only have two to three days

that they will breed a year.

Maddie: Wow.

That makes it hard for you

to help build an insurance population.

Nuch: I know that's why we need to develop

multiple tools that we can use to,

you know, all sorts of situations.

Maddie: Have you tried like playing Boyz II Men softly?

Maybe a bottle of wine?

You add some skunk smell around.

You know, maybe Fin needs a haircut?

You know, you ever thought about that?

That's why Nuch and her team

are trying to develop new techniques

to help breed maned wolves.

Nuch's lab collaborated with Cornell University

to perform the first successful in vitro fertilization

in domestic dogs.

Nuch even adopted one of the IVF puppies.

Now, they are trying to adapt IVF techniques

for the maned wolf.

But until then, we'll just have to rely

on the whims of romance.

Adam: Hey Maddie!

Maddie: Oh hey Adam!

Adam: What was the favorite thing that you learned

while making this video?

Maddie: Oh the glitter poop.

Adam: Glitter poop?

Maddie: Yeah, so to determine the digestive health

of all these different wolves,

they put different color glitter in their food bowls.

Adam: Oh, okay.

Maddie: So when they poop it's glittery,

and they're like oh Fin has blue poop.

Adam: Okay. Well that's the kind of sparkly fact

that you can learn from Skunk Bear,

NPR's science show

Please subscribe to our channel right here.

Maddie: And you can watch the last episode

of Maddie About Science, right here.

For more infomation >> Matchmaking For Maned Wolves | Maddie About Science - Duration: 4:46.

-------------------------------------------

Vinyasa flow for Breast Lift 🍒 Yoga Health Tips for Firming Breast. Chest Workout for Women - Duration: 24:03.

Yoga news: yoga teacher turned 100.

It's a woman.

In new yoga for breast: we will lift the sagging breast after the age of 40, increase the breast

size, give the breast a beautiful shape and restore the breast after breastfeeding.

We sit down comfortably, as you can.

Breathing out, bring your palms together in front of the chest in prayer position.

We will throw out a bra because after new breast training we will not need bra support,

we will make youth breast at any age.

We will be proud of our breasts.

New core yoga and holding time of yoga exercises gradually activate the work of our body system.

It's an effective non-surgical breast lift treatment.

This yoga workout is a new combination of the ancient yoga school of India and the latest

medical researchers.

Breathing out, we try to do prayer position behind your back.

Try to do this set of fit exercises at the end and make your breasts appear bigger and

younger.

New gymnastic and beginners workout are natural remedy for breast.

This vinyasa flow contains simple and difficult asana variations and will allow you to gradually

master the yoga asana.

These are yoga for beginners at home and yoga challenge for intermediate simultaneously.

The asana will necessarily work even in a simple version, because this is a limit for

the body now.

In beginner yoga if you just start to learn about science of ancient India, prepare the

8 towels, chair and yoga mat for our training for girls.

We lie on the stomach with hands behind the head.

Lift your upper torso.

Gradually we will move easily to new asana levels.

You just feel that you can do more today due to this unique practice of yoga for health.

Exhale and relax.

Bhujangasana ( this asana is а Cobra pose )

The hands are near the shoulders.

With a deep exhalation perform a bend back.

This kundalini yoga and yoga healing music will cause the body to work in renewal mode.

You will have firm and tight breasts after three months of regular yoga.

The flow yoga includes the breast exercises, hatha yoga, pranayama and vinyasa of ancient

India, breast massage, yoga stretches, exercises for weight loss, yoga therapy, fitness, health

tips and relaxing exercises.

Exhale

and relax.

Salambasana (this asana is a Locust pose) Join your hands behind your back.

Lift your upper torso and legs.

What is yoga?

This amazing workout at home is challenge for breast aging, for aging changes in the

breast.

This yoga home remedy lifts and firms sagging breasts after breast feeding.

Yoga is always good for the all body, mental health and relaxation.

I'm yoga teacher and yogi.

Relax and make beautiful attractive - witch you want to have.

Exhale and relax.

Dhanurasana (this asana is a Bow pose) Now legs bend at the knees, we grasp the ankles

and climb up and fix this asana in yoga for intermediate.

In beginner yoga you may bend the right leg and grasp the right arm for the right ankle

and climb up.

Hold this position as long as you can.

In beginner yoga change legs.

We bend the left leg and grasp the left arm for the left ankle and climb up.

Ustrasana ( this asana is a Camel pose ) We knee.

The hips squared forward.

The chest is opened.

We begin to stretch out the back.

Create a bend backward.

In beginners workout fix this variation.

If everything's OK you may try to touch your heels.

We find the body's area with the unpleasant feelings or some discomfort or maybe the pain.

We breathe out into this organism part until we got relieved.

We slow exhale and relax.

Urdhva Dhanurasana ( this asana is Upward Bow pose or Wheel pose)

We lie down on the back and lift the hips up.

Join your hands behind your back.

In yoga for beginners fix this variation.

Now we place the palms next to the ears.

Push evenly through your hands and feet, lifting up through the hips and chest.

In the first time you may do a support on the head.

Do yoga regularly.

It will be 5 times a week.

And you should wait for 2 hours after your meal.

We relax with breathing out.

Eka Pada Rajakapotasana (this asana is a One Legged King Pigeon pose)

We sit on the floor with right knee bent.

The right foot is close to the pelvis.

In beginner yoga you may do this asana near the wall.

Raise the hands up.

And fix this version in beginner yoga.

If everything's OK you may wrap the right arm behind your back and hold the right foot

. The next asana level is a posture when we hold the left foot with our left hand and

lift the left leg up.

We change the leg.

Now the left foot is close to the pelvis.

Raise the hands up.

In yoga for intermediate we wrap the left arm behind our back and hold the left foot.

And full variation is an exercise when we hold the right foot with your right hand and

lift the right leg up.

We slow exhale and relax.

Virabhadrasana (this asana is a Warrior pose )

We spread our legs about four feet apart.

Turn your right foot slightly to the right and your left foot out to the left for 90

degrees.

The right knee is directly over the right ankle.

The hips squared forward.

Both hands are parallel to the floor.

Now we raise hands up.

Breathe out and relax.

Turn your left foot slightly to the left and your right foot out to the right for 90 degrees.

The left knee is directly over the left ankle the hips squared forward.

The hands are parallel to the floor.

The whole body is in the same plane.

Now raise the hands up and stretch.

We relax with breathing out.

Kumbhakasana ( this asana is а Plank pose) Inhale and draw your torso forward until the

arms are perpendicular to the floor and the shoulders directly over the wrists, torso

is parallel to the floor.

The hips squared forward.

We relax with breathing out.

Ashtanga namaskara (this asana is a the knees, chest, and chin pose; pose of eight points)

From plank position, drop your knees to the floor.

Lower your chest and chin down to the floor, landing your shoulders right over your hands.

Keep your elbows hugging into your sides.

Your butt stays high.

Hold this position as long as you can.

In yoga for intermediate your knees don't touch the floor.

It's a posture where the body is balanced on eight points of contact with the floor:

feet, knees, chest, chin and hands.

Exhale and relax.

Now we repeat Chakrasana (this asana is a Wheel Pose)

We lie down on the floor.

We grasp our ankles and lift up the hips with breathing out.

Keep calmly breathing . We slow exhale and relax.

Yoga news: do not eat vegetables and fruits even with a small rotten speck.

Subscribe, because the next week: new liver treatment at home, an ancient liver cleansing

recipe, prevention of liver disease.

it's new yoga secrets every week.

Supta Virasana (Reclining Hero Pose) We place our heels next to the hips.

Your knees are closer to each other.

With exhalation we lie down on the floor we lift our arms overhead and rest them on the

floor.

We stretch from our knees to our hand fingers.

Our small of the back presses into the floor.

The thorax is opened.

In beginner yoga use the towel for the back.

Close your eyes.

We breathe calmly with sound.

With each inhalation the belly rises and expands, we feel more energized, feel happier and more

balanced.

With each exhalation the belly sinks and we feel easiness at the all body.

Shavasana (Savasana - Corpse Pose).

Lie on your back comfortably.

Hands and feet are slightly apart, palms are up.

We relax the foot fingers, relax the feet, relax the ankles, relax the lower legs, relax

the knees, relax the hips, relax the pelvis, we don't feel the legs, we relax the hand

fingers, relax the palms, relax the wrists, relax the forearms, relax the elbows, relax

the shoulders, relax the shoulder joints, we don't feel the arms.

Relax the pelvis, relax the lower part of the abdomen, relax the belly button area,

relax the solar plexus, relax the chest, relax the breast, relax the lower back, relax the

central part of back, relax the shoulder blades, we relax neck, relax the head, the whole body

is relaxed.

Thank you for taking care of your health.

Subscribe, comment and ask questions.

And I always answer you

For more infomation >> Vinyasa flow for Breast Lift 🍒 Yoga Health Tips for Firming Breast. Chest Workout for Women - Duration: 24:03.

-------------------------------------------

DIY Firecracker Popcorn for 4th of July 🇺🇸 | Evite Recipes - Duration: 1:03.

(4th of July Music)

For more infomation >> DIY Firecracker Popcorn for 4th of July 🇺🇸 | Evite Recipes - Duration: 1:03.

-------------------------------------------

8,000 Starbucks Locations Set To Close For Diversity Training - Duration: 2:05.

For more infomation >> 8,000 Starbucks Locations Set To Close For Diversity Training - Duration: 2:05.

-------------------------------------------

Sewing Tutorial for Creations by Michiè #120 | Dress Version - Duration: 4:50.

hey everyone, here is how I put together the Creations by Michie pattern #120 the dress

version.

I do have a version for the dress and I will link that below.

So to begin, and this is optional, but if you want to do any embellishing for that collar,

go ahead and do that before you cut out that pattern piece.

I did some shadow work embroidered stars and I have a detailed video on that that I'll

link below.

Once you are done with any optional embellishing, then you can cut out that front collar piece.

You'll also have one front collar piece for the lining, too.

Then you'll have two collar back pieces cut on the fold.

One dress front cut on the fold and one dress back cut on the fold.

First I gather the neckline around the entire neck.

I moved my needle over to do one row of the gather stitches and then I move it the other

direction to do the second row.

The idea of two rows of gather threads is that your permanent stitches will go between

the two rows and having two rows keeps your gathers nice and neat instead of going crooked

while you sew.

And If I'm not mistaken, the pattern calls to gather between the notches, but when I

did that, I didn't like the look, so I pulled out those threads and gathered from one shoulder

to the other.

After that, I join the front to the back at the side seams with French seams.

Then I iron the French seams towards the back of the garment.

Next I finished the underarm area.

To do this, I took a two inch wide bias strip and folded that in half and gave it an ironing.

Then I sewed it to the underarm area of the dress.

Then I trim up those raw edges just enough so I can turn over that folded edge of the

bias band and have it reach the machine stitches.

I'll use these machine stitches later to hand stitch this band in place.

I like to save all my hand sewing until the end whenever it's possible, so for now,

I'll just iron down the band.

Soo moving onto the collar.

Now this is an optional step, but if you want to have piping or lace, ribbon, etc on the

collar, this would be the time to add that.

I'm using this delightful ribbon piping stuff, I'll link it below.

On the front collar, you could start at the shoulder edge, but the pattern calls to only

embellish that curved part of the collar, so that's what I did.

Remember, the seam allowances here are 5/8" so that's why the piping is moved over so

much.

I do the same thing to the back of the collar.

So now I can attach the collar to the dress.

I folded the collar in half and gave it a gentle ironing so I could find roughly center.

Then I pinned the center front of the collar to the center front of the dress.

I sewed the two together with the collar facing up so I could go right on top, or slightly

inside, of those previous stitches attaching the piping on.

This gives a really neat transition between the piping to the fabric without any gaps.

Anywho, this is what your collar will look like and I machine sewed those bias bands

into place if you will… looks like this.

So then I put the lining of the front collar right sides together and sewed from one side,

around the shoulder, down the neckline, to the other shoulder, and back to the other

side.

So then I trimmed up the corners and seam allowances as well as clipped around the curves

of the neckline.

Finally, I turned the collar right sides out and used this little pointer tool (again,

linked below) to push out those corners before giving everything a really good ironing.

I ironed the bottom edge of the lining of the collar under since this will be hand sewn

into the machine stitches later on.

And I repeated the same thing to the back of the collar, you know, gathering the dress,

pinning the center front of the collar to the dress, and after sewing that, putting

the lining onto the collar and sewing the two together.

And at this point, we are almost done.

I turned the raw edge of the hem up twice and ironed that in place.

Normally I would hem by hand, but I thought I could get away with machine stitching this

one.

I guess you could finish this raw edge with some lace or trim.

And after adding some buttonholes and hand sewing those linings in place, here is my

finished garment.

I hope this video was helpful.

If you have any questions, please leave them in the comments below and I'll do my best

to answer them.

As always, I appreciate y'all for watching and I hope to catch ya next time.

For more infomation >> Sewing Tutorial for Creations by Michiè #120 | Dress Version - Duration: 4:50.

-------------------------------------------

Things You Should Do For Conceiving a Girl | How to Conceive a Girl 2018 - Duration: 3:21.

Things You Should Do For Conceiving a Girl How to Conceive a Girl 2018

For more infomation >> Things You Should Do For Conceiving a Girl | How to Conceive a Girl 2018 - Duration: 3:21.

-------------------------------------------

Hillary Clinton Let One Truth Slip That Will Destroy The Democrats For Good - Duration: 14:01.

Hillary Clinton Let One Truth Slip That Will Destroy The Democrats For Good

Hillary Clinton actually told the truth.

But she instantly regretted it.

That's because she let slip one secret that will destroy the Democrat Party for good.

Clinton was appearing at an event where she was being questioned by Time Inc.

Brands CCO Alan Murray and she revealed that – in her opinion – being a capitalist

hurt her in the Democrat primary.

The Daily Beast reports:

"Hillary Clinton claimed Wednesday that declaring herself to be a "capitalist"

during the 2016 presidential primaries may have hurt her with Democratic voters.

"Probably," she said when asked by Time Inc.

Brands CCO Alan Murray if the declaration hurt her.

The pair appeared in conversation as part of the Shared Value Leadership Summit in New

York City.

"It's hard to know but I mean if you're in the Iowa caucuses and 41 percent of Democrats

are socialists or self-described socialists, and I'm asked 'Are you a capitalist?'

and I say, 'Yes, but with appropriate regulation and appropriate accountability.'

You know, that probably gets lost in the 'Oh my gosh, she's a capitalist!'"

Clinton concluded, partly referring to the popularity of her primary rival, Sen. Bernie

Sanders (I-VT), who ran as a self-declared democratic socialist."

In the 2016 campaign, her

primary opponent was self-declared socialist Bernie Sanders.

Sanders pushed Clinton to the limit as his socialist platform caught fire with the Democrat

base.

Of course Clinton is no capitalist.

Her platform was the most socialist platform of any candidate – including Barack Obama

– in American history.

But Clinton's big reveal also exposed the danger the Democrat Party is heading toward.

Americans don't want systemic upheaval where the capitalist system – which turned the

United States in the most prosperous nation in history – is overthrown and replaced

with command and control style economic policies.

Socialism may

be

popular with the Democrat base, but that is the fringe of American politics.

No Democrat can win a primary without harnessing the energy of the base.

The base – however – is forcing Democrats to take insane positions on issues that will

make the party unelectable in future contests.

An example of this is a report that a secret group of big money Democrat donors put an

agenda together for 2020 and reparations for slavery was at the top of the list.

New Jersey Democrat Senator Cory Booker – one of the leading contenders for the 2020 Presidential

nomination – proposed legislation that would launch a pilot program guaranteeing a federal

job to every unemployed adult in three targeted areas.

No one will ever confuse Hillary Clinton for a truth teller.

But her slip of the tongue revealed a truth that Democrats don't want the American public

to know.

If their party base regards Hillary Clinton as a capitalist, then their descent into madness

is complete.

And their chances of defeating Donald Trump in 2020 were just flushed

down

the drain.

For more infomation >> Hillary Clinton Let One Truth Slip That Will Destroy The Democrats For Good - Duration: 14:01.

-------------------------------------------

Tips and Tricks - 5 Tips for State of Decay 2 - Duration: 5:06.

[XBOX SOUND]

> State of Decay is back and

killing zombies has never been so fun.

This is a game where you'll need to band

together with new comrades,

gather materials, assist other survivors

and just try to stay alive in this insane world.

But you don't have to do it alone anymore.

Undead Labs has introduced multiplayer

into the series for the very first time.

>> You got that right Ethan.

Now pay attention because these five tips

may be your only shot at survival.

Tip number one, stay stealthy.

Zombies may lack brains but

they still have eyes and ears.

If you do manage to avoid being seen or heard,

you can take them down instantly.

The best method for doing this is by crouching.

When crouched, your noise while moving

is drastically reduced allowing

you to move towards unsuspecting stragglers

for an easy takedown.

>> Although running away from the undead can

seem like an easy way to evade them,

you're in a world full of zombies.

So, you're most likely running towards more

plus running produces more noise

which alerts nearby zombies,

making the situation even worse.

And when you run out of stamina,

you're in for a heap of pain.

>> Tip number two, prioritize a vehicle.

Like the tip says, you need to

prioritize finding a vehicle.

It can be very easy to walk from place to place at first,

but having a car makes survival

and scavenging so much easier.

>> There are actually

a ton of cars scattered throughout the area.

Find a lookout point on

your map and climb to the top of it.

When you peer out, you'll see question marks all around.

Hover over each one and your survivor

will identify what's at that location.

It's very easy to spot a car from here,

but your journey isn't over yet.

Most cars are abandoned for a reason.

Many are out of gas or are in need of repairs.

So make sure you're carrying at

least a repair kit and a gas

can when searching for vehicles. Just in case.

>> Tip number three, perks of a vehicle.

Typically, a character can

only hold one rucksack at a time.

But if you're using a car,

you can deliver a trunk full to your base all at once.

It makes scavenging way easier and

allows you to keep your base well stocked.

>> It's also pretty fun

to run over zombies with your car.

This can be a quick way to take down a hoard but it

can also damage your vehicle pretty easily.

If you want to make it home safely

after a long day of looting,

you've got to make sure your cars are in tip-top shape.

It's good practice to bring

a repair kit and a gas can along for each journey.

But don't worry, you can store them in your trunk.

Tip number four, community needs.

Once you have supplies and transportation,

you'll need to focus on your community.

Your community will start off small but can

grow as you continue to help more survivors.

As it grows, your home base will need to grow in tandem.

Keeping supplies filled,

a morale high will keep your community thriving.

You can see what is boosting morale and what is

bringing them down via the base menu.

From here, you can accommodate your citizen's needs and

work on objectives that make your community happier.

>> One quick way to ruin

your community's morale is by running low on supplies.

Although scavenging can be a quick fix,

you'll need a more long-term approach.

Look at the supplies you're lacking or quickly

going through such as medical, or food.

Then search for outpost that can supply

those resources and help fill the quota.

You can only claim a few outposts,

but by upgrading your command center at your base,

you can allow more to be claimed at one time.

Use these zones to supply your community

so that you can focus on other objectives.

>> Tip number five, Diversify.

As you bring new members into

your community and begin specializing in skills,

you have to determine

which path you want each survivor to go down.

It's best to have people specialize in

different areas so that you can

approach objectives in new ways.

If I wanted someone who could scavenge,

I'll choose to specialize in backpacking and stealth.

This way, the person can sneak

past zombies and carry more supplies.

>> And if I decided I wanted to take down a play card,

I know I'm going to be fighting a ton of

zombies and getting pretty banged up.

Stealth and backpacking don't really help me here.

So, having another survivor dedicated to striking and

shooting could be a far better approach

to taking on the play card.

Some facilities at your base require

certain knowledge to begin building.

So, having each person learn a different skill can

allow your community to build and expand much further

>> State of Decay two is

a fantastic improvement over the first game.

It adds many new features to keep

both newcomers and series veterans on their toes

plus the inclusion of multiplayer is exactly

what fans have been asking for

since the release of the first game.

>> While the genre has been done before,

State of Decay two keeps it fresh with

its in-depth base mechanics and morale system.

It's amazing to see how each survivor

impacts the community in their own way.

Driving down the streets,

plowing through hordes has never been so much fun.

Just be careful where you park.

[XBOX SOUND]

For more infomation >> Tips and Tricks - 5 Tips for State of Decay 2 - Duration: 5:06.

-------------------------------------------

Simple Start - Operations Overview for Ventrac HQ680 Tough Cut - Duration: 4:37.

I'm Aaron Graber and in this video we're gonna talk about one of our most popular

attachments the HQ680 tough cut. The tough cut is our most versatile mower

deck and it's utilized by all different types of customers.

It's capable of cutting anything from field grass to woody plant material up to one inch in diameter.

The tough cut has a 68 inch cut width and is a three blade

rear-discharge design. This helps process high volumes of material without bogging down.

In its standard form the tough cut has three separate cut heights: three, three

and five eighths, and four and a quarter inches. With the optional swivel wheel

kit you have the ability to change the cut height from three and a half inches

to seven inches in half-inch increments. Just like all ventrac mower decks

the tough cut has the ability to be flipped up from the front for easy

cleaning and maintenance. The tough cut connects to the tractor via the front

hitch arms and the belt driven PTO. Belt drive is a clear advantage in this

application because you don't have to worry about breaking shear pins or

building excess heat with hydraulic drive. If you come up to an obstruction

or you build up too much material in the deck the belt can slip and you can back

off and let the mower deck catch back up before it does any damage.

It's a much more convenient way to mow in rough applications. To gain access to the

center of the deck you remove the rubber latch on both sides and flip up the hood.

This will reveal all the spindles and drive belts for any pre checks or

maintenance that you need to do. This also gives you access to the pin

locations for the flip up procedure if you just have the standard gauge wheels

you adjust the cut height by moving both the left and right side wheels into the

different slots on the deck. If you do have the optional swivel wheel kit you

adjust the cut height by changing where those are bolted on and also by changing

the pins located near the hitch arms. The kickstand of a tough cut is an important

feature that you need to know for operation.

There's three separate positions of the kickstand and they're all used for something different.

When you're actually mowing with the tough cut or you've got it in transport use

the top position if you don't the kickstand will hang down and can catch the ground.

Place the kickstand in the middle position to use the flip up

procedure and when you're attaching or detaching make sure the kickstand is in

the lower position. This places the hitch arms at the right place so that you can

actually drive into the deck or out of it.

To flip the tough cut up you want to

park the tractor on a level surface raise the hitch arms all the way up then

you need to remove the deck lid pull the front and rear pins on both

sides set the kickstand to the middle position lift the deck up and then

replace the front pins for safety. The advantages of our tough cut are so

impactful they have made it our number one selling attachment.

First of all this deck on a 4500 tractor is able to go into places where other machines can't

get to sometimes that means mowing on steep hills other times it means mowing

in very wet or swampy areas.

The tough cut deck is engineered to work well and built to last.

It has heavy duty components and deck construction so that

it can stand up to true commercial use day in and day out.

This deck has proven to be irreplaceable

for golf courses, municipalities, schools, and contractors

doing anything from mowing native areas to clearing paths through the woods.

It's truly the most versatile deck we have and it handles almost anything.

Thanks for watching this video on the tough cut visit our website at ventrac.com to

find the dealer near you or to learn more about this and other Ventrac products

For more infomation >> Simple Start - Operations Overview for Ventrac HQ680 Tough Cut - Duration: 4:37.

-------------------------------------------

What is Next for Our Channel? - Duration: 2:59.

- So it's Tuesday and there's no toys

and you're wondering where they're at.

Well I'm gonna tell you, comin' up next.

(upbeat music)

Hi, welcome back, I'm Brian from Three Princess Productions

and I'm glad you're tuning in today.

Toys for Tuesday will return next week

so don't miss out on that video.

If you haven't already, make sure you

click that subscribe button and click the

Belle icon down below.

Starting this Friday, we're gonna talk about

some of the tools that we use to make

some of these videos.

I've got a lot of comments on,

"Hey, could you help teach me.

"Your videos are really good.

"They're edited nice, you know, you got a good pace."

Things of that nature so those have all

been linked in the comments so

what I've done is I've taken a little bit

of a survey and a lot of people wanna know,

what equipment do we use, how do I use it,

what video editing software do I use?

Some people have asked how did I create

the slow motion, what frame rates do I use?

And things of that nature.

So starting this Friday, it won't be

every Friday, but starting this Friday

at least the first Friday of every month

what we're gonna do is we're gonna talk

about some of the stuff that we do

to help make these videos.

So the first thing we're gonna talk about

is we're gonna talk about the video camera

that we use so make sure you tune in this Friday.

I think that it's the best 4K camera

for under $1,000 that gives you a ton

of features and doesn't force you to buy

a whole lot of extra equipment

to keep upping your videos.

So we'll talk about that on Friday.

But we're also gonna talk about

the video editing software that I use.

I'm gonna give you some tips, some tricks,

and tools and tutorials on how to utilize

that software and improve your video quality.

Hopefully you'll join me for the ride

and you'll enjoy these videos.

So make sure you put down in the comments

what type of videos you want to see.

What do you wanna learn about?

Do you wanna learn about slow motion?

Do you wanna learn about how to use your camera better?

I'll do my best to try and make videos

that hit on those topics, so that you

can hopefully grow your channel to the level

that you want it to go to.

So next week, Toys for Tuesday will return,

so don't worry, the girls will be back.

But join us this Friday so we can talk

about the video camera that we use.

So if you like this video, make sure

you hit that like button down below.

Also, subscribe to our channel.

Make sure you click that Belle icon as well

to guarantee that you see our next video.

Until then, we'll see you on Friday

and we're gonna talk about the best 4K camera

for YouTube for under $1,000.

So tune in Friday, we'll see you then.

'Til then, bye!

(upbeat music)

For more infomation >> What is Next for Our Channel? - Duration: 2:59.

-------------------------------------------

✅ Senior Fianna Fail TD calls for party whip on forthcoming abortion legislation - Independent.ie - Duration: 2:45.

Senior Fianna Fáil TD Barry Cowen has called for a party whip on forthcoming abortion legislation

Speaking at this evening's parliamentary party meeting, Mr Cowen suggested members should vote as a party when legislation is put before the Dáil in the coming weeks

Mr Cowen warned against political gamesmanship over the referendum result and said there should be no "back biting" following the vote

The Offaly TD's call follows a landslide victory for the Yes side in last week's referendum to repeal the Eighth Amendment of the Constitution

The large majority of Fianna Fáil parliamentarians were  opposed to removing the Eighth Amendment

However, most have said they are now willing to support abortion legislation following the emphatic vote in favour of abortion

Earlier in the meeting, Fianna Fáil leader Michael Martin, who supported repealing the Eighth, called for unity

Mr Martin warned against infighting and said the party should heal any divisions caused by the referendum

Sligo Fianna Fáil TD Marc MacSharry is understood to have hit back at Mr Cowen and Mr Martin buy criticising the party's leadership for not being more inclusive

Mr MacSharry told the meeting that "unity comes from shared ownership" and asked that the party include all TDs and senators in decision making

He said many TDs pledged to vote against abortion legislation before the last election and upheld that commitment during the referendum

Mr MacSharry urged calm within the party and said there was no need to overact to the result

Donegal TD Charlie McConalogue suggested that TDs and senators hold one-on-one meetings with Mr Martin

Online Editors Follow @Independent_ie

For more infomation >> ✅ Senior Fianna Fail TD calls for party whip on forthcoming abortion legislation - Independent.ie - Duration: 2:45.

-------------------------------------------

Liverpool sign Brazilian star Fabinho from Monaco for reported $50 million - Duration: 2:38.

Liverpool sign Brazilian star Fabinho from Monaco for reported $50 million

  AS Monaco midfielder Fabinho will move to Anfield on July 1.

(CNN)Liverpool have agreed to sign Monaco midfielder Fabinho, the English Premier League team said.

The Brazlian, 24, who is to move to Anfield on July 1, is to be transferred in a deal that could be worth more than $50 million   Liverpool are in a league that is probably the best in the world, so there were many positive points for me to choose to come and I am very, very happy to be here.

  Liverpool finished fourth in the Premier League last season and reached the Champions League final.

    Manager Jurgen Klopp said: His reputation as a character in the dressing room and his attitude in training has come through from everyone we speak to. He has ability and mentality to play at the highest level in a number of positions.

He can play 6, 8 and 2.

This is cool. he added.

Fabinho, who has four caps for his country, is the clubs first signing of the summer transfer window, Liverpool said on its website.

At Monaco Fabinho made 225 appearances and scored 29 goals in five seasons with the French club.

Liverpool see Fabinho as a replacement for Emre Can, who is expected to sign for Juventus on a free transfer this summer upon the expiration of his Anfield contract, ESPN reported.

                         .

For more infomation >> Liverpool sign Brazilian star Fabinho from Monaco for reported $50 million - Duration: 2:38.

-------------------------------------------

Review: iPad for Education - Duration: 3:46.

For more infomation >> Review: iPad for Education - Duration: 3:46.

-------------------------------------------

Starbucks Closing For Anti-Bias Training This Afternoon - Duration: 1:56.

For more infomation >> Starbucks Closing For Anti-Bias Training This Afternoon - Duration: 1:56.

-------------------------------------------

✅ Josh Brolin is to be a father for a third time. The 50-year-old actor - who has two kids, Trevor, - Duration: 2:26.

Josh Brolin is to be a father for a third time. The 50-year-old actor - who has two kids, Trevor, 29, and Eden, 24 from his previous marriage to Alice Adair - took to Instagram to reveal his 30-year-old wife Kathryn is expecting her first child, and the little one is currently ''no bigger than a sweet potato''

He wrote: ''There's a new sheriff in town, and she's no bigger than a sweet potato. Hang on to your hats. #jbkbstucktogether #lilbeanterritory #loveisaslovedoes (sic)''The 'Deadpool 2' star shared a picture of Kathryn showing off her baby bump in a crop top while on a walk

She also took to her Instagram account to share the happy news by posting a picture of herself revealing her bump by lifting up her shirt

Kathryn wrote: ''Something's cookin. Baby Girl Brolin on the way #jbkbstucktogether #loveisaslovedoes (sic)''Josh married his former assistant Kathryn in September 2016 after he popped the question in March 2015

The couple said their vows in an intimate ceremony in front of close family and friends in North Carolina.Josh, Kathryn, and their guests shared photos from the big day and the run up to their nuptials on social media using the hashtag #JBKBStuckTogether

Before the wedding, Josh admitted planning the ceremony had turned him into a ''control freak''. He said: ''I'm the guy who has to force himself to back off! ''I'm such a control freak and I want to control everything

It's not even that I want to control it - I just want to be in the middle of it. ''I want to be in the nucleus of it because that's the fun part

That's the nectar. ''We're still in the midst of figuring out the best time and all that stuff, but it's very exciting

''

For more infomation >> ✅ Josh Brolin is to be a father for a third time. The 50-year-old actor - who has two kids, Trevor, - Duration: 2:26.

-------------------------------------------

Sewing Tutorial for Creations by Michiè #120 | Sunsuit Version - Duration: 5:39.

hey everyone, here is how I put together the Creations by Michie pattern #120 the sunsuit

version.

I do have a version for the dress and I will link that below.

So to begin, and this is optional, but if you want to do any embellishing for that collar,

go ahead and do that before you cut out that pattern piece.

I did some shadow work embroidered stars and I have a detailed video on that that I'll

link below.

Once you are done with any optional embellishing, then you can cut out that front collar piece.

You'll also have one front collar piece for the lining, too.

Then you'll have two collar back pieces cut on the fold.

Two sunsuit front pieces and two sunsuit back pieces.

First, I sew down the center front with a French seam.

And I have a detailed video linked below on how to do French seams.

For those pleats at the neckline, I mark the bottom of the pleats with this frixion heat

activated pen (linked below) and I mark the top of the pleats with a little clip.

That way I can make the pleat by lining up the clips at the top and dots at the bottom.

And I repeat that process for all the pleats.

After that, I join the front to the back at the side seams with French seams.

Then I iron the French seams towards the back of the garment.

Soo moving onto the collar.

Now this is an optional step, but if you want to have piping or lace, ribbon, etc on the

collar, this would be the time to add that.

I'm using this delightful ribbon piping stuff, I'll link it below.

On the front collar, I started at the shoulder edge, sewed along until I got close to the

corner, snipped where the corner goes so it'll lay nice and flat, put my needle down in that

corner, and turned the collar to continue sewing.

Remember, the seam allowances here are 5/8" so that's why the piping is moved over so

much.

And here is Henry's daybue sewing with me.

Sweet little boy.

And there is my front collar with the optional piping embellishment.

I do the same thing to the back of the collar, but this time the piping just goes around

the curve.

So before you can attach the collar to the sunsuit, the underarm area needs to be finished.

To do this, I took a two inch wide bias strip and folded that in half and gave it an ironing.

Then I sewed it to the underarm area of the sunsuit.

Then I trim up those raw edges just enough so I can turn over that folded edge of the

bias band and have it reach the machine stitches.

I'll use these machine stitches later to hand stitch this band in place.

I like to save all my hand sewing until the end whenever it's possible, so for now,

I'll just iron down the band.

So now I can attach the collar to the sunsuit.

I pinned the center front of the collar to the center front of the sunsuit.

Oh, and just ignore those horrible edges of the collar – I made a mistake and had to

rip out some stitching… and yes, I make mistakes and keep that thread ripper right

next to my machine.

Keeps ya humble.

Anywho, this is what your collar will look like and I machine sewed those bias bands

into place if you will… looks like this.

So then I put the lining of the front collar right sides together and sewed from one side,

around the shoulder, down the neckline, to the other shoulder, and back to the other

side.

Again, just ignore those terrible edges – I had to rip out a seam.

But I sew all of these collar bits with the stitching from the piping facing up so I can

go right on top, or slightly inside, those previous stitches.

This gives a nice, neat transition from the piping to the fabric.

So then I trimmed up the corners and seam allowances as well as clipped around the curves

of the neckline.

Finally, I turned the collar right sides out and used this little pointer tool (again,

linked below) to push out those corners before giving everything a really good ironing.

I ironed the bottom edge of the lining of the collar under since this will be hand sewn

into the machine stitches later on.

And I repeated the same thing to the back of the collar.

And at this point, we are almost done.

I turned the crotch raw edge under twice and sewed that in place.

I also turned the raw edge of the legs under twice and sewed that in place.

I guess you could finish this raw edge with some lace or trim, but I just hemmed mine.

From there, I used the snapsetter to put durable snaps in the crotch (great for all those diaper

changes), and already covered covered-buttons in the collar shoulder area.

After I finished all of that and the hand sewing, this was the finished outfit.

Here is my little Henry in the 3 month size.

I hope this video was helpful.

If you have any questions, please leave them in the

comments below and I'll do my best to answer them.

As always, I appreciate y'all for watching and I hope to catch ya next time.

For more infomation >> Sewing Tutorial for Creations by Michiè #120 | Sunsuit Version - Duration: 5:39.

-------------------------------------------

PayPal Express for Ninja Forms - Duration: 0:33.

With the Ninja Forms PayPal extension, customers can be easily redirected to make purchases

upon submission.

Add a PayPal action to your form, choose from where you wish the total derived, record any

details for your records, leave a note for your buyers, and even test your integration

with sandbox mode.

After form completion, when your customer clicks submit, they'll be quickly walked

through PayPal's login and purchase confirmation.

It's that easy.

Start collecting payments through your WordPress site today, with PayPal & Ninja Forms!

For more infomation >> PayPal Express for Ninja Forms - Duration: 0:33.

-------------------------------------------

The Pacific Northwest places voted best for your summer vacation itinerary, 2018's Best NW Escapes - Duration: 20:25.

For more infomation >> The Pacific Northwest places voted best for your summer vacation itinerary, 2018's Best NW Escapes - Duration: 20:25.

-------------------------------------------

344 Beaverbrook Street - River Heights Home For Sale - Your Social Savvy™ Team - RE/MAX One Group - Duration: 3:24.

Whats up everybody, I'm Jesse

and I'm Addison and we're you're Social Savvy™ Team at Re/max One Group

and we have a gem of a home for you

that's right, we are getting Social Savvy™ in the heart of River Heights

right behind us is 344 Beaverbrook Street

and you know what, we put our top 5 Reasons why you are not going to want to miss out

on this opportunity

so let the countdown begin

Number 5 - The home, the moment you walk through the front door you are going to fall in love

character, charm, meets todays modern vibe

hardwood floors, high ceilings, loads of natural light

check, check, check

but you know what, let's have a little heart to heart here

where are you at in the stage of your life?

are you looking for your first home? Maybe your newly engaged looking for a home where

you can grow together

this is the opportunity for you

do you love hosting and entertaining? Well you can do it all right here

seriously, this granite island is HUGE, and you know what with direct access to the backyard

you are going to fall in love with every square foot of this home

but guess what, theres more space, so why don't you go find Addi

We are still on Number 5 - check out this basement space

you got a wet bar, perfect for entertaining friends and family

and that bedroom is fully legal egress .. awesome

plus you missed a three piece bathroom that has a walk-in shower

and by the way.. I'm 6foot 1' .. look at the ceiling height, you can't beat this space

now let's find out what number 4 is

Number 4 - the backyard

you want green space, you've got it right here

and seriously I should be wearing my shades because we've got loads of south facing sunlight

you like to cut the grass? you can do that

you want to grow some flowers? you could do it

you want to put a tiered deck behind you? and who doesn't love a tiered deck .. you

can do it

now let's go find Addi and see what number 3 is

Number 3 - the location

I mean seriously, River Heights is amazing, I lived here for 10 years and you can't beat

the block between Academy and Corydon

Plus, mature trees everywhere and friendly neighbours

So let's tell everyone what number 2 is

Can you guess it? - Location!

Close to the airport, close to Assiniboine Park, close to downtown all under 10 minutes

away

you are going to love it

plus, it's close to running trails and even schools in the area

so what do you think number 1 is going to be?

LOCATION!

Seriously walkability to everything, Mona Lisa's, Saucers Cafe, any kind of restaurant

you want.. you are close to it

you like deserts - Jenna Rea Cakes

you like clothing - Margo & Maude, Madd About Style

everytime you are out and about you are going to discover something new in this neighbourhood

If you want to see more

BOOM

there's the site, check it out

Explore, we are making it easy for you to fall in love with this home

thanks for watching, and you know the drill

Stay Social™

For more infomation >> 344 Beaverbrook Street - River Heights Home For Sale - Your Social Savvy™ Team - RE/MAX One Group - Duration: 3:24.

-------------------------------------------

Memorial Day l Roger Wicker For Senate - Duration: 0:21.

hello I'm senator Roger wicker wishing you a happy Memorial Day. On this day, we

honor the soldiers, sailors, airmen, and marines who made the ultimate sacrifice

to keep our country safe and free. God bless you and your families, and God

bless America!