1 Remove the orange tape.
The orange tape locations may differ from video.
Remove the orange tape.
Note: Discard the removed orange tape.
Open the scanning unit / cover.
Remove the orange tape.
Note: Discard the removed orange tape.
Close the scanning unit / cover.
2 Plug in the power cord.
Caution: Do not connect cables other than the power cord yet.
Plug in all the way.
3 Press the ON button.
Open the operation panel.
Press the ON button.
Follow the on-screen instructions.
Check the screen, then tap [OK].
The installation preparation is now complete. Next, install the ink tanks.
Không có nhận xét nào:
Đăng nhận xét