Yo what is going on guys it is your boy
Yogge here and today if you hopped on
remastered you would have probably seen
a new we can work their playlist game
mode which is pop hunt so I'm gonna tell
you guys how to play this game mode what
it is and what you can do so basically
before I even start there was a little
trailer so I'll show you guys a cup of
that anyway so you guys saw you can turn
in too little objects that is around the
map and try to hide and there's a full
team trying to hide in another full team
trying to find you guys oh my god guys
it is so much harder than it looks I
don't think me my team I've ever found a
like have ever found the full other team
at least I don't think we have we
probably have once but this game mode is
really hard tell me if we as you guys
saw you can turn into a lot of things
you have three props you can turn into
it's a random three so you know you
press triangle to turn them to them and
basically just go around the map hide
and yeah it's really funny at some
points you can like sit in a place that
people will just run past you like
you're part of the map it's so so funny
but yeah so if you just bored sitting
only master and finna warfare just any
game and you want to find a good game up
to play or game at least I don't know
this is really really fun I mean if you
just wanna have some fun with your
friends for a few like an hour or two go
hop on this with your friends but
anyways guys so how you play so so when
he turns to a prop you can jump so
that's the first thing to know you can
jump in a little objects tend to move
faster than big object that's number one
and you can really drew people in this
game oh let me just tell you guys that
much if you spotted it's really easy to
run away because there's no aim assist
but honestly it's way more fun in my
opinion if you just say somewhere and
just watch people come up front of you
and actually you to do is press l 22
flash so usually if somebody like you
know like oh shit that's not supposed to
even they start walking towards you just
in case that's when you can use your
flash you can flash them in it lasts for
more than it usually does in normal game
modes any can run around and you know
just find another hiding place or droop
them out to you hide and then there are
other things you can do if you press
down on the d-pad you can spectate
people i know a lot people don't notice
but say you're hiding and you want to
spectate your friend because you getting
chase you press down on the d-pad
and then you go into spectating mode
even though you're alive and then from
there you can press left or right and
you know you can see everybody else on
the map or you can press down again to
exit that and it something else also to
notice is that you can press left or
right on the d-pad to zoom in or out
also you can press r1 to lock and say
you're on a slippery Hill right in you
and your prop and when you try to go on
that slope you're standing straight and
obviously like part of your Papa's
hanging out of the hill right because
it's not slopey like the hill is you can
press I believe its square it's
something like it says like slope or
something like I don't know what it says
it'll basically it will align you to the
mat more sometimes this completely does
not was like sometimes it does and then
there is an r1 button that walks you
basically you know when you look around
your object moves when you press r1 you
can look around without your object
moving so for those of you that are
going to play problem that's all you
really need to know go high try to
survive or if you hunt try to find them
all I don't know if you can wait if you
are hunting good luck i'm beyond this is
really hard if there's people that can
hide really well is gonna be hard hey
guys so this is gay play I would have
done like you know what you hear my
party chatter and all that but I
couldn't because I was in a hurry today
and I was just trying to chill my
friends have fun but I also wanted to
make a video on this so we don't know
about it I don't know what you're doing
there has been trailers there's people
wife Samira I know like hollow point so
go play it anyways guys we gotta live it
as immature as if you like these videos
are much I stay healthy and yeah i guess
i'll leave the gameplay going because
joe and i'll see you guys on the next
one
now
For more infomation >> COD4 REMASTERED NEW PROP HUNT GAMEMODE - COD4 MODERN WARFARE REMASTERED PROP HUNT - Duration: 4:46.-------------------------------------------
Hatsune Miku: Project DIVA Future Tone - [PV] "The World is Mine" (Rom/Eng/Esp Subs) - Duration: 2:57.
I'm the #1 princess in the world
And that's how you'll treat me, got it?
One:
You must notice that I changed my hair
Two:
Take a good look, all the way to my shoes. You following?
Three:
For every one word I say, reply with three
Got it? Then do something about
My idle right hand!
It's not like it's selfish or anything
To want you to believe from the bottom of your heart
That I'm adorable
I'm the #1 princess in the world
Notice me! Hey! Heeey!
Keeping me waiting is out of the question
Just who do you think I am?
Hmph. I think I could go for some dessert!
This very instant
Shortcake with a strawberry on top
Premium creamy egg pudding
Okay, okay, I'll try to contain myself...
Don't write me off as selfish
Because hey, I can make it on my own
You're gonna regret it later
No doubt! 'Cause you know I'm...
The #1 princess in the world
You'd better keep your eyes on me
Or I might not be here one day
Out of nowhere, you pull me from behind
"What are you... Huh?"
"Look out, you almost got run over!"
You say as you turn away
...Maybe it's you I should be looking out for
-------------------------------------------
More Natural Edge From Spring Pruning - Rustic Napkin Rings - Duration: 6:58.
Hi, Alan Stratton, from As Wood Turns (www.AsWoodTurns.com). In the last few weeks, I've been playing
around with limbs or suckers pruned off a hazelnut tree. I have a little bit left. I'm
not sure what to do with it yet. I'll have to put my thinking cap one. It is fun trying
to figure out things to do with strange wood, in this case, these little branches.
So, why not this time, use it for rustic napkin rings. I now have a set of eight that I can
use. In this case, in woodturning we typically turning the exterior of a piece of wood to
make it look nice. In this case, I'm relying on the tree to have provided the exterior
and the interesting aspects of the exterior. All that I have done is to hollow out the
interior and smooth it out and put my name in it. There's a lot of variation here.
Some of the sides are thin. In this case, there was quite a dip in the side of the branch
so this side of this napkin ring is extremely thin and has a little dip in the side. But
this is just visual interest. So let's make this set of napkin rings.
My wood is about 12 inches long. It is slightly irregular but this will be fun. The first
task, of course, is enable a secure hold on the wood. The limb fits into my long nose
jaws but I cannot trust the hold in a short section. So, I'm using just a little bit
of the limb for a mounting tenon. It does not take much to cut the tenon. Then I can
reverse the wood into the secure hold of the jaws.
Now I'm ready to do the napkin rings. But, there is nothing on the exterior of the wood
to turn, clean up, or sand. What's left? Of course, the inside. I'll drill out the
interior. The warm shavings smell like popcorn. Sorry no butter.
Then sand the interior up thru the grits. Now, I can part off the ring. The only problem
is that the cut side is quite rough. I'll have to address that later.
Since the wood is still mounted, I'll move immediately to drilling out the next ring.
Yum – more popcorn. Maybe I can add a little salt.
And sand the interior. I'm using the first ring to measure for
the next. However, I can accept some variation. This is rustic after all. Then repeat six
more times for a set of eight. The last section of wood left in the chuck
after all the rings is a bit short but I'll try to use it anyway. I need it to be a jamb
chuck to finish the interior from the side parted off that is rough. So here we go to
cut a tenon to fit my rings. Then sand the interior again from the opposite
side from before. With difference in sanding, I have to use a little tape occasionally to
maintain a good hold. Then quickly sign all eight rings.
Then I thought, What good is a set of napkin rings if they just bang around in a drawer.
Why not put them on display while not in use. Hmmm. Dual purpose. How about a stand? But
I want to maintain the natural edge theme. I don't have any dry limbs from the same
tree with a larger diameter sufficient for a base. I'll have to use a fresh green limb
pruned this year. I found one long enough and thick enough that I can turn an 8" spindle
integral with the base. I don't want a plain dowel, so why not enlarge some finial elements
as long as they fit the napkin rings. At first, I'm using a medium gouge. But when it's
time for good smooth work, I'm switching to my ½" skew. I'm sanding before I do
the base so I don't wait too long. I'm leaving a natural edge on the base portion
also. With the amount of wood I've removed from the top section, my tail stock pressure
is weakening. I'm having to use a parting tool to waste away wood. Anything bigger stalls
the rotation and I cannot apply more tail stock pressure without breaking the thin parts
of the spindle. Between a parting tool and finally a skew, I get the underside somewhat
reasonable. And part it off. Normally, I would simply sand the bottom.
But this is green and sanding green wood is a pain. Plus it is irregular. I've been
wanting to try out a reciprocal carving tool that has been in the shop for a long time.
I'll pick three points on the bottom for feet. The shape of the bottom helps. Then
carve out some of the middle. Now, before you ask me what carver I'm using, I'll
say, I don't recommend it. It is a puny knock off from only of those tool liquidator
vendors. While I'm careful to always carve on the side opposite my hand, I'm nervous.
Next time I carve, I need to find a Kevlar glove.
Finally, I finished the spindle and the napkin rings with walnut oil.
I like my natural edge napkin rings. No one has the same napkin rings. Perfect for a woodworker
or a back to nature type. Now, what else can I do with last year's prunings.
We'll see you again next week for another woodturning video. Please give this video
a thumbs up, subscribe and tell your friends. Always wear your full face shield –goggles
are not enough protection even on small stuff. Until next week, this is Alan Stratton from
As Wood Turns dot com. Let's keep on turning.
-------------------------------------------
All the copper mines will blow away! - Duration: 2:17.
Alas poor independent Sweden because of Vasa you're destroyed,
There won't be a head on your shoulders
Because you declared Sweden's independence,
There won't be a head on your shoulders
Because you declared Sweden's independence,
There won't be a head on your shoulders
It is time for the Scanian revenge,
all the copper mines will be blown away!
There is no Engelbrekt, Knutsson or Margareta
To protect you from the Scanian again
There is no Engelbrekt, Knutsson or Margareta
To protect you from the Scanian again
It is pointless to dance around the Midsommarstång
No flowerpenis nor Holy Birgita Shall save you
No one is as strong as the Scanian
And the Scanian won't be enslaved!
No one is as strong as the Scanian
And the Scanian won't be enslaved!
It is time for Scanian revenge,
all the copper mines will be blown away!
There is no Engelbrekt, Knutsson or Margareta
To protect you from the Scanian again
There is no Engelbrekt, Knutsson or Margareta
To protect you from the Scanian again
Vasa, you will not get away like before
You'll carry your ski's on a stick
your doom is already in sight
when the Queen converts to catholism!
Your doom is already in sight
when the Queen converts to catholism!
It is time for the Scanian revenge,
all the copper mines will be blown away!
There is no Engelbrekt, Knutsson or Margareta
To protect you from the Scanian again
There is no Engelbrekt, Knutsson or Margareta
To protect you from the Scanian again!
-------------------------------------------
How To Make A Box Part 6 - Fitting The Dovetails - Duration: 13:47.
Hello and welcome to Donald Vlogsifys Woodshop.
I'm your host, Donald Matthews.
Umm... First things first. You've probably noticed me uploading
sometimes my weekly videos....
end up being a basic wood terms video.
And... It's because I'm working now and....
was out of the working field, I guess you'd say......
For quite awhile. And now I'm on my feet........
working in a hardware store.... big box store.....
And my body just aint used to it, (Plus I aint 20 no more) So when I get some time off....
I kinda just zone out.
So it's kinda hard for me to get off work and come home and....
do this stuff.
So that usually what happens when I upload one of those basic woodworking terms videos.
Either time is short for me or.......
I just been too tired to get out there and do anything. And then, I don't have a shop.
Weather is an issue too.
Just thought I'd let ya'll know that.
I'm getting ready to show you the video of me
kinda trimming up, paring, and fine tuning......
These dovetails on this box.
I was trying to get them real tight. Real tight dovetails and all that.
But then.... I'll show you here.
This uhhhh....
a couple of these dovetails,
kinda chipped out.
And I'm probably going to have the same issue on a couple more of them.
So I've quit worrying so much about the gaps on them.
And getting it perfect. Box....
And my camera shut off for no apparent reason. Anyway....
As I was saying, a couple of these dovetails. Because they had some worm damage in them.
Kinda broke off. Which is no biggie. I'll just fill that.
But it made me quit worrying and stressing so much about the gaps in these dovetails.
Cause the box is for me and
it kinda suits me better because let's face it....
I've got a few gaps, a few scars.
Several imperfections.
And.....
It's just who we are. But we're both functional.
So we're gonna let it be. Let it ride. Fill it with some
filler. Probably wood glue and sawdust.
I've got an idea, I'm going to experiment with something. But I'll get into that later when I do it.
And uhhh that's pretty much it.
ummmm what else?
I think that'll do it. Let's get into the video. This is me
I've already cut the dovetails. I'm kinda paring them up. Trying to fit them together.
You'll see one little incident in there
where this split apart while I was trying to
fit it in there and......
Don't try to force your dovetails.
That's apt to happen.... it's just apt to happen.
So at least you'll get to see how I fix it. Sometimes you can, sometimes you can't.
So let's get to it.
Thank ya for watchin.
Enjoy.
Thank you for watching. I do appreciate all of you.
Please give me a thumbs up.
Share my video.
If you're not already subscribed, during the last 20 seconds of this video,
there'll be a little button over here.
Please click it and subscribe to my channel.
Down below me there will be a.....
link to the playlist of the build of this box.
The start of it. Eventually we might get the finish of it there.
Yeah, we're gonna finish it eventually.
In the meantime.
Thank you for watching. I believe I said that already.
Have a lovely day.
Have a lovely night. Have a lovely lovely lovely year.
Don't let this pollen get to you like it's gettin to me.
Have a lovely life. Because life is short. It's meant to be enjoyed. Peace!
Không có nhận xét nào:
Đăng nhận xét