Waching daily Sep 3 2017

I've previously ALGA filament from Algix, which incorporated some organic algae matter

into the filament.

However, that's the only filament from Algix that does that, thankfully, so today's APLA

or advanced PLA is just a regular PLA blend.

Again, working off of the tiny 100g sample, I didn't have much material to spare, but

since printability was much better, I actually got a full data set and, look at that, a hero

print out of it.

The filament retails at about 50€ per kilogram, which is quite expensive.

However, as an advanced PLA, I'm gesturing air quotes here, Algix claims better adhesion,

strength, stiffness, higher heat deflection temperatures, yet lower warping, which seems

contradictory, so we'll put that to the test.

Recommended print temperatures are between 195 and 210°C, which is perfectly normal

for PLA, and my test prints at 190, 200 and 210°C, shown from left to right here, all

turned out fine, so I went with the highest temperature to possibly improve strength.

Visually, this Majestic Gold color looks more like a brown-ish brass, but it does have a

very deep metallic effect, which I think looks very nice.

It doesn't show up on vertical surfaces much, they just end up with a darker, dull

finish, but top and bottom surfaces get a really nice depth to them.

These samples were all printed during the same print and with the same settings, the

only thing that changed was the direction they were oriented.

Quality is fine otherwise as well, the slight drooping and stringing we're seeing can

still be tuned out probably even with just a slightly lower print temperature.

Mechanically, it's kind of interesting.

There seem to be two different popular types of PLA, one is more of a ductile, tough, almost

ABS-like type, the other is harsh, brittle and likes to crack and APLA is definitely

part of the latter group.

Tensile strength and impact resistance are good, but there are other PLAs that are better.

Now, for the claim of improved thermal resistance, well, there are about four different behaviours

I've seen with the boiling water test ranging from PLA becoming chewing-gum like to polycarbonate

not caring at all.

With APLA, I honestly couldn't tell a difference to any other PLA, so while there might be

a marginal measurable difference, it certainly does not make a difference in the real world.

In conclusion, Algix APLA is certainly a great filament.

I like the metallic color, but if that's not factor for you, there are other PLAs out

there that give you a much bigger bang for your buck.

Keep in mind that value does not factor into the final rating, so with that ignored, APLA

gets ranked in the top tier of filaments.

For more infomation >> How "advanced" of a PLA is the Algix APLA really? #Filaween2 filament review - Duration: 2:47.

-------------------------------------------

When is the PERFECT time to start something in Life ✔️ - Duration: 3:11.

What is going on guys?

Ishraj is back to stay, this time.

I know I haven't uploaded a video in long long time.

I have been super busy doing a lot of amazing stuff!

If you wanna know what I'm working on these days, let me know in the comments section,

and I'll try and make a video about all the different AMAZING things that I'm currently

working on.

Anyway, so yeah I'm back and I'll upload a video EVERY SUNDAY from now on.

So, today, I'll talk about when is the right time to start ANY VENTURE.

Alright let's do this!

Most people don't start because they don't have money, don't have the right team, or

don't have the right skills etc etc etc.

All these are excuses.

Start right now from where you are, with what you have and do what you can.

All that you need is a great idea and MASSIVE EXECUTION.

Money will follow.

Just develop the product.

If you don't have a programmer for instance.

Go out there to all those programming meetups.

Talk to people and convince them that if they work for you, both of you will succeed in

this.

Failures and mistakes are great, as long as they don't come at a cost.

So, the best time to fail is when you don't have anything - or hardly anything - to lose...Think

about it!

Most people wait to have money to start something but then when they have the money, they fear

to lose it.

The real time to start is when you don't have anything to lose.

So, basically, when you're still very young is the ideal time cus' you got nothing to

lose.

Not much money, no responsibilities, no job commitments etc.

That brings us to another remark.

Notice why no big companies change?

Well, the difference between a startup and a company is that a startup can take risks

still because it has little to nothing to lose while a company doesn't have this luxury

of taking risks.

Companies have too much to lose.

So, if you're a risk taker, work for a startup.

In fact, start one now.

You've got nothing to lose.

Remember true entrepreneurs don't look for jobs.

They create jobs for themselves and others.

Again, don't wait to become a millionaire to start, because then, you will have too

much to lose.

Start now when you have NOTHING to lose!

I hope this video has clarified to you guys on when is the PERFECT time to start in life.

If you've got any questions, drop it down in the comment section, and I'll get back

to you guys!

And, please share this video with all your entrepreneur-friends out there.

And, as always: Keep rocking, guys!

For more infomation >> When is the PERFECT time to start something in Life ✔️ - Duration: 3:11.

-------------------------------------------

'Idol Star Atheltic Championship' Is Cancelled Due To A Company Strike? - Duration: 1:07.

'Idol Star Atheltic Championship' Is Cancelled Due To A Company Strike?

Those who are a fan of sports and K-Pop idols will be disappointed to hear that the program might be canceled this year due to a company strike.

It was previously reported that, A vote cast by the MBC branch of the National Media Labor Union this past August 29, 93.

2% of participating MBC employees said yes to launching a mass general strike in September, meaning every employee will cease to carry out their duties without leaving any working hands behind for necessary labor.

Now, the show has announced that it s currently postponed when a representative stated on September 2nd that, Filming for ISAC scheduled for September 4 has been postponed. The postponed filming date has yet to be determined; it is under discussion.  .

But this isnt the only program affected by the strike. Popular shows such as Infinity Challenge and I Live Alone are also facing delayments in their broadcasting schedules.

Hopefully, the strike can end peacefully and our favorite programs can resume their normal schedules. Stay tuned for more updates.