Thứ Ba, 1 tháng 8, 2017

Waching daily Aug 1 2017

The Ilya Muromets bomber is coming to Battlefield 1 in the Russian expansion In the Name of

the Tsar.

Thanks to the Battlefield 1 Community Test Environment, I was able to get my hands on

the massive aircraft before the full release of the DLC in September.

Quick mention that some of this footage is courtesy of DANNYonPC – and you can check

out his channel in the video description.

In Battlefield 1, the Ilya Muromets features a three person crew, the pilot, a forward

gunner with a light machine gun, and a rear gunner with a 20mm cannon.

Players can also spawn inside the aircraft to fire their gun out of the side or even

repair it.

Now, there are three loadouts for the bomber: The first is a strategic bomber armored with

small anti-infantry bombs, flechette clusters and a spotting camera for revealing enemy

locations.

Next is a demolition bomber with access to the larger bombs and emergency repair for

penetrating fortified enemy positions.

The most interesting and versatile is the support bomber with cluster incendiaries,

smoke bombs, and a supply crate.

The incendiaries are very useful for booting players off the massive guns of the Zerell

battery, and the supply crate brings a bit of commander mode back to the Battlefield

franchise.

The crate can be airdropped anywhere on the map to provide players with health and ammunition.

Players don't even have to interact with the crate to benefit from it.

If you're within a few meters of the supply drop, your ammo and health will automatically

replenish like it would from an ammo or health crate.

It may sound a bit overpowered, but the crate's notoriously difficult to aim and it can be

easily destroyed by explosives like a grenade.

Also, since I know you're wondering – yes it can also kill players by crushing them.

What are your thoughts on the new massive Ilya Muromets bomber coming to Battlefield

1?

Which loadout appeals to you?

Tell me in

the comments.

For more infomation >> Russian Thunder: Battlefield 1's New Ilya Muromets Bomber for In the Name of the Tsar - Duration: 3:00.

-------------------------------------------

Learn Colors and Numbers for Kids with 3D Colors Ice Cream Cupcake Machine - Duration: 1:34.

One

Red

Two

Blue

Three

Pink

Four

Purple

Five

Yellow

Six

Brown

Seven

Green

Eight

Orange

Nine

White

For more infomation >> Learn Colors and Numbers for Kids with 3D Colors Ice Cream Cupcake Machine - Duration: 1:34.

-------------------------------------------

How To Get a Web Domain and Unlimited Hosting for Free | limited 2017 - Duration: 3:56.

For more infomation >> How To Get a Web Domain and Unlimited Hosting for Free | limited 2017 - Duration: 3:56.

-------------------------------------------

Insider Rumors: Kellyanne Conway Under Consideration For WH Communications Director! - Duration: 1:42.

For more infomation >> Insider Rumors: Kellyanne Conway Under Consideration For WH Communications Director! - Duration: 1:42.

-------------------------------------------

भारतीय अर्थव्यवस्था 1.6 निर्धनता / गरीबी (Indian Economy 1.6 POVERTY ) in HINDI for CGPSC UPSC IAS - Duration: 36:33.

For more infomation >> भारतीय अर्थव्यवस्था 1.6 निर्धनता / गरीबी (Indian Economy 1.6 POVERTY ) in HINDI for CGPSC UPSC IAS - Duration: 36:33.

-------------------------------------------

How To Fish Toads For Bass | Bass Fishing - Duration: 15:53.

Glenn: Really.

Some bushes right here on the end of a flat that drop right off.

Really, this is like a prime spot, and it was!

Yes!

There we go.

Big old fish on a toad, on a toad!

There we go.

There we go.

Come here.

Right there.

There we go.

Oh, I think he wanted that.

Look at that boys.

Took that right down.

That's what toad fishing can do for you right there.

All right, buddy.

Hey folks.

Glenn May here, with BassResource.com, and today I want to talk to you about toad fishing.

Yeah, fishing solid body, soft plastic toads.

These things are a blast to fish, especially in the warmer months.

I love doing this.

So today I want to talk to you a little bit about how to rig them up, what kind of gear

you should be using, and then how to fish it.

Let's first start off with equipment.

With toad fishing, you're going to be throwing in a lot of cover, a lot of places where the

fish can wrap you up or around objects, be it bushes, trees, dock pilings, things like

that, so you need some heavy duty gear.

I'm using a heavy power, fast action rod.

It's a seven foot three rod.

You can use anywhere from say a 7.1 to a 7.8 rod, up to personal preference.

I like rods a little bit on the shorter side of things, so I'm going with a 7.3.

You need that heavy power and that backbone to set the hook and get that fish going towards

you.

There's a huge hook you're going to be using.

I'm going to show you.

This is a thick 5/0 hook.

I'll show you that in a second, and that's one of the reasons why you need a stout rod

to set that hook.

I'm using 50 pounds Kanzen braid line from Seagaur.

The reason why I'm using that is, first of all, you're making long casts with toads.

You're throwing it over big flats, areas of vegetation that may be just under the surface,

and you're fan casting to it.

And what I mean by fan casting, is basically you start casting say about the 10:00 position,

make your retrieve, the next cast is going to be about the 11:00 position, the next one

at 12, 1, so on and so forth, okay?

You're just covering, a very methodical way of covering a large expanse of water, but

you're also making long casts to cover as much as you can.

So when you're using braided line, when you get above that 50 pound mark, it's kind of

hard to cast long distances.

It kind of inhibits your distance, so that's why I stick with 50 pound.

I don't get any bigger than that.

I specifically use Kanzen line, because toads, you know, they're very buoyant, they stay

on the surface, but they do sink.

The braided line helps.

It's a little buoyant, and it helps them stay on the surface, rather than using say fluorocarbon,

which can actually bring the bait down.

Fluorocarbon is a little bit more dense and has a little more weight to it, so, you know,

it doesn't float as much as braid, so that's why I'm using 50 pound Kanzen braided line.

On it, I'm using a reel that...the most important thing about the reel is not so much the reel

speed, because you're not bringing the toad back at, you know, a mach 50 like you would

crank baiting.

What you want to focus on is the drag, and this is a Kastking Assassin Reel.

It's got 16 and a half pounds of drag.

That's pretty stout.

Most production reels these days, when they come out, they usually have 11, 12 pounds

of drag.

This is 16 and a half, so you're getting up in that area where you have a really strong

drag system.

There are other reels that have that drag that strong, even some that have stronger

drag than that.

I'm not saying this is the only reel, but that's the choice you want to look at when

you're looking for frog fishing, or toad fishing, what kind of drag that the reel has.

So let's talk about rigging here.

Like I said, you're using a really stout hook.

This is a 5/0, real thick wire hook, and it's keel weighted and also has a screw lock on

it, all right?

The key thing about the weight, see how far down the shank it is?

That's what you want.

You don't want it...there's some keel weighted hooks where I see the weight right up here.

All's that's going to do is make your toad point downward, nose down.

It's going to dig it into the water, and make it dive, so you want the weight further back

here to where the hook starts the bend.

This hook is by Moaner Hooks, but there's a lot of other hooks out there that have that

kind of weight to it as well, weight placement, and then, of course, you got the screw locks.

So let me show you how you rig this.

First of all, just with the screw lock, you put it right dead center, right in the nose

of the frog or the toad here, and you just screw it on.

I mean it's that straightforward.

Just screw that on just like that.

All right.

Now it's on.

Now, just like that, the key with fishing toads, you want that back to be straight or

even have a little bit of a bow to it.

That allows it to run true.

If you've got it bowed like this, what's going to happen is that toad's going to want to

flip over and run upside down, even though you've got this weight here, it's going to

want to do that.

This is a quarter ounce weight.

You can go lighter than that.

If you don't use a weight, the most...you're actually going to have problems with the toad

spinning, especially if you bow it up like that.

You've got to have a little bit of a bow down or perfectly flat.

So I just rig it in like you would Texas style.

You can see where the hook's supposed to come in.

It's right in the very, very back, so I just push it up like that, put that hook right

in the very back part of it, and there you go.

Now I just skin hook it just barely, just like so.

Nice and straight, see?

All right.

So that's how you rig it.

Toads don't come with their own hook, so you've got to learn how to rig it right, but that's

exactly what you want, nice, straight.

See that, night and straight.

Perfect, now we're ready to go toad fishing.

There.

I had to wait until I felt em.

There we go.

There we go.

There we go.

Come here you.

Look at that.

Not a big guy, but he took it.

See, the key with fishing these toads is when the fish blows up on it, your natural reaction

is to set the hook right away.

Instead, you gotta drop the rod, rod tip, and feed them slack, and feed it to them,

and wait.

Reel up some of that slack, wait until you feel the weight of the fish, and then pop

em, you know.

Drop the rod tip just a little bit, throw some slack along if you need to.

Boom, and pop them in.

Look, the hook went all the way through his cheek.

That's how you do it guys.

The places where I like to fish it.

I like to fish it in the areas where the weeds are just under the surface, from a few inches

to maybe two feet or so under the surface.

That's the perfect place to be throwing a toad.

These little legs here they create some disturbance on the water, and a straight cast and retrieve

works really, really well on a lot of toads.

This is designed to be fished as slow as possible while keeping it on the surface, so, like

I said, you don't need a fast reel for that.

You just need to be able to reel it fast enough to keep it on the surface and create a little

bubbling, gurgling action on the water.

Today, we don't have a lot of disturbance on the water.

In other words, you don't have a lot of wind, so the slower the better.

If there's a little more wind, you want to create a little more disturbance, so speed

it up a little bit, and you create a little bit more of a gurgling action.

The unique characteristic about this Rage Toad, let me show you here, are its legs.

You've got this little ridge right here, right, and that enables it, these legs, to move,

and you're barely moving it across the water, right?

It just doesn't take a whole lot of movement, so you can move it very, very slow and get

a disturbance.

But if the water is slick calm, and you're not, and it's just glass smooth, that's probably,

even then, too much disturbance.

So what you can do, is just take yourself, take a pair of scissors, and cut off the insides

of this, right on the inside here, right here, just cut off a little bit of that meat right

there, and make this leg, this part, thinner, and that will create less disturbance on the

water.

Real subtle action, especially when on those slick, calm mornings, just a little bit of

gurgling, just keep shaving off a little bit of that, and you'll find you'll catch a lot,

get a lot more bites.

Keri: There you go.

Good one honey, good one, good one, good one, good one, good one.

Glenn: Here we go.

Keri: Nice fish.

Glenn: Here we go.

Keri: Nice one.

Toad fishing at its finest.

Glenn: Come here.

There we are.

Keri: Nice fish.

Glenn: So, the key, remember when you're fishing these toads, is to keep the rod tip up.

Keep that rod tip up so you keep that toad toward the surface, and that what he did.

He hit it right on the top.

Another thing to keep in mind is color.

A lot of times what I like to do fish a bait that's got a little bit of green pumpkin in

it and has a white belly.

I think that looks the most natural and what most frogs look like, so I start with that.

But if I'm not getting bites, or just getting blow-ups or follows, then I'll switch to a

darker color, say a black, or I may go with a, like a camo type color, something that's

got variations of different color, maybe a June Bug even, some kind of a darker color.

And if all else fails, I'll try to find something really bright and obnoxious, like a chartreuse

colored frog.

You'd be surprised just by changing up color, how many more bites you'll get if your just

getting follows or blow-ups.

A nice little hole right in there isn't it?

Keri: Oh.

Nope.

Glenn: You've got to be kidding me.

Keri: I got a weed, but he blew-up on it.

Throw in there.

He didn't get it.

Glenn: Nope, doesn't want it.

[00:11:43] [silence]

[00:12:14]

Keri: YUM Dinger time.

He wanted it and look at that.

If they don't hit the toad the first time, follow it up with a YUM Dinger.

Glenn: The thing with toads though is they don't work just in the spring.

I'm sure you've been doing a lot a bit of research on this, and a lot of them say fish

it in the spring, and then put them away.

I don't know, I've been fishing toads.

My wife and I have been fishing toads for decades now, and we didn't read any books

on it.

There wasn't YouTube out to learn how to fish it, so we just went out and started fishing

them, and it turns out, we can be pretty successful with them any time the water is say about

55, 56 degrees, from the spring all the way to the fall, when it starts to cool down and

pass that mark again, you can catch fish on a toad.

So don't put it away in the spring.

That'd be a mistake.

Throw it out in those flats where you see, you know, Milfoil, Hydrilla, Coontail, anything

where it's just under the surface.

Throw it out there, and make a nice, you know, easy cast, nice slow retrieve.

Sometimes what we like to do is give it a little yank with a rod tip, and give it a

little gurgle, and then slow it back down again, and don't be afraid to kill it.

That little erratic action is often what triggers bites.

So reel it, reel it, reel it, kill it, and then especially if you get it next to a bush,

next to a dock piling, next to some kind of structure, that's a great place to kill it,

and the fish will come up and smack it.

One other thing you need to be real careful about is when you're reeling these back in

to the boat, and you're just about to pull it out of the water to make another cast,

a lot of times that's when the fish smack it.

It scares the bejesus out of you.

I mean it's scared...they come up and just, you're just ready to pull it out of the water,

and they come out and bam, smack it.

I don't know why, but that's happened quite a bit with us fishing these toads, so be ready

at any time and have a good pacemaker if you have those, because it can really stop your

heart there for a second, but it's a real exciting way of fishing.

Keri: Whoa.

Dear Lord.

Glenn: Whoa.

Holy-Mollie.

Keri: Dear Lord.

Glenn: Wow.

Keri: That was like an instant.

Holy crap.

Right at the boat.

Glenn: Over on this side.

Wow.

Keri: Right at the boat.

Here you go, folks.

I hope that was on camera.

Glenn: It was.

Keri: Because that was right at the boat.

He just came up and ate that...

Glenn: Toad.

Keri: Toad.

It just came up and ate that toad.

There you go folks, toad fishing.

It scared the daylights out of me.

Glenn: Anyway, that's basically the way you fish a toad.

There's not a whole lot to it, other than just a nice steady retrieve, let it fall.

If you're throwing it over the matted weeds, and there's like a pocket or something like

that.

You see a hole, let it drop down and tumble down in there and see if you can't get a bite

and a lot of times that works.

Other than that, have a whole, heck of a lot of fun.

I hope those tips help.

For more tips and tricks, and for more answers to all your questions about bass fishing,

visit BassResource.com.

For more infomation >> How To Fish Toads For Bass | Bass Fishing - Duration: 15:53.

-------------------------------------------

Seoul to leave door open for silent Pyongyang on dialogue offer - Duration: 4:34.

Today was the day Seoul should be holding talks with North Korea on arranging reunions

for separated families.

However, like the offer for military talks, no response.

Our unification ministry correspondent Kwon Jang-ho joins us in the studio to make sense

of the situation.

Jang-ho, let's start with a brief outline of the current situation.

Sure, Daniel.

So earlier this month on July 4th, President Moon Jae-in gave an address in Berlin, where

he outlined his North Korea policy vision.

In it he pledged to start dialogue with the regime: first to engage in military talks

to end hostile activity on the border, and second to hold talks for reunions for separated

families.

On his return to Seoul, the government sent a message to Pyongyang proposing the talks

be held on July 21st and August 1st, respectively.

However, those dates have now passed and there has been no response or even any acknowledgment

of the offers from North Korea.

Pyongyang has given Seoul the cold shoulder.

What can we take away from the silence.

Well I don't think anyone expected it to be easy.

North Korea usually likes to do things on their own terms, so we were perhaps at first

expecting North Korea to rebuff the proposal and come back with a counter offer.

This protracted silence was perhaps a little unexpected, but here's one expert who says

it's not necessarily a bad sign.

"Normally when North Korea rejects South Korea's offers, it does it directly.

For example, if you look at the past two administrations, when North Korea had a grievance, it expressed

it within 2 to 3 days.

But this time, the regime has not made any official response...they're also not making

direct criticisms of the Moon administration.

Pyongyang is not openly rejecting Seoul's offer, but it is showing that it wants to

take things forward on its own terms."

It could be interpreted as a tactic to keep options open, especially as I understand that

Seoul has said that the door for talks remain open?

That's right.

Yesterday the Unification Ministry made a statement saying that the lack of response

does not change the administration's policy of pursuing both sanctions and talks, and

they called on North Korea to respond soon.

But what about the missile launch.

Should we not interprete that as a snub towards Seoul's offer of talks?

Not necessarily.

Obviously the missile launch was a concerning event, especially considering the leap it

showed in its technical capability to reach the mainland U.S.

There have been some calls for the Moon administration to reconsider its North Korea policy, and

it could be a test of Moon's resolve to stick with the administration's current direction.

However the ICBM is also more largely seen as an act of defiance against the U.S. and

the international community rather than Seoul, and so therefore does not necessarily affect

Seoul's pursuit of dialogue.

"An ICBM is a long-range ballistic missile, therefore it is aimed at pressuring the U.S.

rather than South Korea, especially if you look at the timing, which came right after

U.S. House passed sanctions bill on Russia, Iran and North Korea.

The launch was about sending a message to Washington, rather than a rejection of Seoul's

offer for talks."

North Korea may not have put a full stop and rejected the offer for talks yet.

Seoul will continue to wait, despite Pyongyang's provocations for now.

Right.

One point I would like to quickly make is that among all this inter-Korean politics

is a humanitarian issue.

Today's deadline was for the talks on the reunion of separated families, and there are

some 65-thousand registered South Koreans who are waiting to take part in these reunions

after being separated from their loved ones over 60 years ago by the Korean war.

But time is running out for those surviving, as more and more of those registered war torn

family members pass away over the years, and so the quicker a response we get from North

Korea the more hope there will be for them.

Of course.

Thank you for coming in today, Jang-ho.

For more infomation >> Seoul to leave door open for silent Pyongyang on dialogue offer - Duration: 4:34.

-------------------------------------------

Learn Colors With Wooden Toys | Baby Songs Finger Family Nursery Rhymes for Kids Colours - Duration: 3:32.

Thanks for watching! Please Like and Subscribe

For more infomation >> Learn Colors With Wooden Toys | Baby Songs Finger Family Nursery Rhymes for Kids Colours - Duration: 3:32.

-------------------------------------------

First Alert: Partly sunny, low 80s for your Tuesday - Duration: 1:15.

For more infomation >> First Alert: Partly sunny, low 80s for your Tuesday - Duration: 1:15.

-------------------------------------------

Naby Keita to Liverpool: Jurgen Klopp plans £48m deal for next summer - SPORTS NEWS - Duration: 2:01.

Naby Keita to Liverpool: Jurgen Klopp plans £48m deal for next summer

Keita had been Liverpools primary midfield transfer target this summer and had bids of £57million and £66m rejected by RB Leipzig.

They were even prepared to offer as much as £70m for the star with manager Jurgen Klopp desperate to add more strength in depth to his squad to mount a challenge in the Premier League and Champions League.

However, Bundesliga side Leipzig have been steadfast in their refusal to sell Keita and it appears Klopp has given up hope of bringing the Guinea international to Anfield.

According to the Daily Mail, Liverpool have dropped their interest in Keita and admitted defeat in trying to convince Leipzig to sell. But the report says Liverpool will attempt to sign Keita in 2018 when his £48m release clause comes into effect.

And Klopp will now consider other targets to boost his team with just two weeks until the season starts. Earlier this week, Keita was caught up in controversy when he made a late tackle on team-mate Diego Demme in training.

Demme needed treatment after the wild lunge and Keita later apologised for his actions. While Leipzig sporting director Ralf Rangnick was forced to explain his comments after implying Keitas head had been turned by a whole village in Guinea.

Liverpool continue their preparations for the new season with a friendly against Hertha Berlin on Saturday.

For more infomation >> Naby Keita to Liverpool: Jurgen Klopp plans £48m deal for next summer - SPORTS NEWS - Duration: 2:01.

-------------------------------------------

Do I need a specialized lawyer for an amputation case? - Duration: 0:31.

I'm Michael Lewis Kelly.

If you have a case involving an amputation, getting you the compensation you deserve requires

a lawyer with experience and resources to find the best experts and to be ready to try

your case to verdict if the insurance companies won't pay up.

Call us today at 310-536-1000 for a free initial consultation, or visit us at www.courtroomwarrior.com

You get one chance at compensation, make it your best.

For more infomation >> Do I need a specialized lawyer for an amputation case? - Duration: 0:31.

-------------------------------------------

Tish'a B'av, 2017: A Day of Reaffirmation, Dedication & Preparation for the Next Stage in History - Duration: 2:29.

Tish'a b'Av , the ninth of the month of Av, is a day of fasting, repentance and prayer,

the day which commemorates the destruction of the Holy Temples.

On this day all of Israel mourns for the Holy Temple.

This year, Tish'a b'Av 5777, which was observed on August 1, 2017, saw record numbers of Jews

brave an oppressive heat wave and ascend the Temple Mount.

Like one man with one heart and one consciousness, their motivation was clear: there is no where

else we would want to be today: this is home.

To be on the Temple Mount on this very day of destruction, is in itself the beginning

of the process of rebuilding and ultimate redemption.

The Jewish people are reclaiming the Temple Mount and reframing Tish'a b'Av from a day

of mourning to a day of reaffirmation, dedication and preparation for the next stage of Jewish

history.

Our sages teach that every generation which does not rebuild the Holy Temple is reckoned

as the generation in which it was destroyed.

Our generation has declared that it will not accept that epitaph, it will not go quietly

into the night.

The statement made by the presence of over 1000 Jews on this Tish'a b'Av on the Temple

Mount resounded loud and clear: we are here to rebuild, and stop the cycle of mourning.

It's time for Tish'a b'Av to become a day of joy and rebuilding.

For more infomation >> Tish'a B'av, 2017: A Day of Reaffirmation, Dedication & Preparation for the Next Stage in History - Duration: 2:29.

-------------------------------------------

Tips for Getting a Goodnight's Sleep with Young Kids! - Duration: 3:40.

For more infomation >> Tips for Getting a Goodnight's Sleep with Young Kids! - Duration: 3:40.

-------------------------------------------

WBZ-TV News Update For August 1, 2017 - Duration: 2:24.

For more infomation >> WBZ-TV News Update For August 1, 2017 - Duration: 2:24.

-------------------------------------------

Development of a Closed-loop Recycling Method for Aligned, Short Carbon Fibre Composites - Duration: 2:35.

I'm rhys and I'm going to be talking to you about my work developing a closed loop

recycling methodology for aligned short carbon fibre thermoplastic composites

so the idea is basically that you get a carbon fibre thermoplastic component

which is waste, or end of life, you shred it and then you dissolve it in a

solvent and so then you have a fibre suspension in a polymer solution from

that you then filter out your fibers and dry them, leaving you with a

polymer solution you can regain nearly all the - obviously not 100% but you can regain

quite a lot of your solvent and then reuse it aids to the closed-loop

methodology so from this polymer solution I

basically precipitate out the polymer again as a powder, but you can also take

that polymer solution and use it in electrospray techniques to make

high-value materials like polymer veils but like I said I just precipitate out

the polymer and then combine it with a highly aligned preform using the HiPerDiF

alignment machine developed here if you any questions I can I can talk about

that later but I basically compression mould that with the powders back into a

part and repeat the cycle so so far I've done it with neat polypropylene I will

include the fibers in future work but it adds an extra layer of complexity I want

to see how the matrix behaves under this process first so I took some virgin

polypropylene, recycled it, tested it for its mechanical properties and thermal

properties and other material properties and then I recycle it again and again so

I did the three times in total and we did see some slight decrease in the shear

strength and we saw also another slight decrease in the ultimate tensile

strength but all the other mechanical properties like stiffness, yield

strength, failure strain was all pretty much the same with maybe six or three

percent variance from the results so for future work I'm going to look at a

molecular weight analysis and then additives analysis to try and figure out what that

drop in the shear strength and ultimate tensile strength was and and then I'd

like to do nylon 66 and then I'd like to impregnate some fibers and

do some composites testing and hopefully towards the end that actually try and

make a and component out of this stuff so maybe

that's what you guys could come in, help me find a component... yeah that's not

mine so I'm finished any questions?

For more infomation >> Development of a Closed-loop Recycling Method for Aligned, Short Carbon Fibre Composites - Duration: 2:35.

-------------------------------------------

Get Gigabit Internet Speed For Free ✔ Speedup Internet For Free ✔ Full HD-2017 - Duration: 2:49.

Hello Guys! What's up?

Welcome to Computer Repair.

I come back with another tech video.

In this video I'm going to show you

How to get gigabit internet speed for free

Years ago

Gigabit seemed likes a dream.

and recently we know it has been rolling out

it has been rolling out

to several select cities

leaving many of us wondering.

Today I'll show you

How you can get Gigabit right now

for free without having to pay up.

So, Let's take a look

How to do that.

Now,

You need two things

The Router provide to you by your internet company

And second, a USB flash drive.

of at least 1GB.

To use 1GB internet connection

You need at least 1GB processing memory.

and you can provide that

with a USB drive.

so

go to router and look for a USB port on the back

Then Plugging the USB drive on this.

then you can proceed to cycle the router

by unplugging it.

Waiting 30 second

and plugging it again.

As I mentioned it,

you need to use the router

that was provide to you

by your internet company.

I f you buy a router at yourself at the store

This is not be compatible.

and if you find

your router doesn't have USB port on the back.

Unfortunately

That means that

your connection doesn't support Gigabit at all.

Now,

After you plugging your USB drive,

and cycle your router

you're ready to go to your computer

and check out your brand new internet speed.

and I hope

this tricks will work

at your internet connection also.

That's it.

Thank you for watching this video.

My name is SALIM KHAN.

You're watching Computer Repair.

If you like this video,

Please put a thumps up and appreciate it

Just so the YouTube algorithm knows that

you actually like this video.

and if you've any question,

Please post them in comment section below.

Thank you..

For more infomation >> Get Gigabit Internet Speed For Free ✔ Speedup Internet For Free ✔ Full HD-2017 - Duration: 2:49.

-------------------------------------------

Arsene Wenger issues transfer update for Thomas Lemar - SPORTS NEWS - Duration: 3:02.

Arsene Wenger issues transfer update for Thomas Lemar

Arsene Wenger insists Arsenal are still 'active' in the transfer market as the club attempts to complete a deal for Monaco midfielder Thomas Lemar.

On Friday, L'Equipe claimed that the Gunners have submitted a third offer worth €50 million (£44. 7m) for the France international, but the bid was rejected by Monaco.

Monaco are adamant that the the 21-year-old will not be sold this summer and Arsenal could turn their attention to signing Riyad Mahrez from Leicester City.

Wenger also remains keen on a deal for Nice's defensive midfielder Jean-Michael Seri, who has a release clause of €40m (£36m). 'What's next is to remain active,' Wenger told Arsenal Player.

'Not a lot [has] happened. 'I believe there are actually two ways to improve the team.

First of all to improve the quality of what we do in training to improve the squad and improve the players we have, and secondly to bring more top-level players in.

'The difficulty is to bring top-level players in because you pay a huge amount of money for very normal players at the moment. As well, all the big clubs are chasing the same players and that provokes huge inflation.

'Maybe this will be the first time we [football clubs] pay over £200m, maybe over £300m with Neymar and around £200m with Mbappe.

'So there is a huge inflation. But we are active, we are working hard and I think we have done well with Kolasinac, we have done well with Lacazette and we are continuing to work.

'There's the usual acceleration in the final part of August. 'But I think you have always to be on alert every day, because a good opportunity might turn up.

'Sometimes people you are after for a long time are not available and suddenly they become available. So you have always to be on alert. That's what we do.'.

For more infomation >> Arsene Wenger issues transfer update for Thomas Lemar - SPORTS NEWS - Duration: 3:02.

-------------------------------------------

Novel Matrix for GFRP Wind Turbine Blades - Duration: 2:28.

So I'm Beth Russell, and as Ian said, my project is on the development of a novel matrix

for glass fibre wind turbine blades and the project is sponsored by Hitachi

Chemical Company Ltd. So the main motivation behind the project is there's a shift in

industry to manufacture their own materials for the specific use in wind

turbine blades. So Hitachi Chemical Company have developed a new epoxy

anhydride resin system, which they claimed has improved interlaminar properties

compared to their previous amine cured system, whilst also having excellent

mechanical properties and a being of low viscosity for resin infusion. As part of

the smaller six month project, I conducted the initial characterisation

of the resin in terms of its thermal properties such as glass

transition temperature. Also conducting processing parameter testing,

such as resin shrinkage, which we established to be 6.8 percent using a novel

gravimetric method, which is well within line of what you'd expect from epoxy,

which is between six and eight percent. And also interlaminar properties of the

glass fibre composite system itself, with the interlaminar shear strength of 64 mega pascals.

One of the major outputs from this research was that the cure

cycle could be optimised, from isothermal DSC and rheological testing

we were able to established that after six hours at seventy-five degrees celsius the plateau in

the degree of cure indicates that the cure cycle could potentially be halved.

Currently ongoing is an examination of the thermal-mechanical properties of a

resin cured under a shorter cure cycle and if this is possible the economic

saving from a manufacturing point of view of a large turbine blade would

be quite impressive. Also ongoing is further development of the processing

and also quantify and other laminate properties such as interlaminar fracture

toughness. Future work will move towards a carbon fibre system as Vincent

said moving to larger turbine blades there's a need to reduce weight, so moving

to a carbon fiber system and establishing whether this matrix can be

directly transferred into the carbon system. Thanks for listening, any

questions?

For more infomation >> Novel Matrix for GFRP Wind Turbine Blades - Duration: 2:28.

-------------------------------------------

Cremation in Armenia: Cause for Conflict - Duration: 0:59.

Today, I want to talk about

the situation of the cemeteries.

Perhaps all of you had to deal with that problem.

And you obviously know that corruption there is thriving.

So, if one wants a good spot,

then with money you can solve any problem.

Cynicism has reached its peak,

and nothing holds people back.

Last week we were

at the funeral of one of our chess-grandmasters' father.

I'm talking about a very famous and talented chess-master.

The head of the Chess Federation is also the president of the state.

I am the vice-president of the federation.

So, everybody knows

that we are always in contact

with these talented people.

But it doesn't stop anyone, as the size of the bribe is $2,000.

Không có nhận xét nào:

Đăng nhận xét