- Hey guys, Brad here with Custom Offsets.
We're doin' another episode
of
hot new suspension, I had to think about it,
I was like, oh ahh.
(buzzer)
This one's gonna be a little different,
it's for a Dodge Ram.
This is gonna be a kit for 2009 to '11
Dodge Ram 1500,
so this is a four-inch Rough Country.
(bass boosted music)
I'm just gonna give you a rundown
on the parts that come in this kit.
So, I guess like I always do, we'll start like
at the front of the vehicle in terms of
the location of the parts.
Up front to achieve the lift we got our strut spacers.
Two strut spacers up here for the front.
Got these nice, big
lift knuckles for the front as well.
You know, that's gonna help with your ball joint angles,
to keep the angles nice and spec.
We also got a front drive shaft spacer,
so you don't overextend the drive shaft.
Sway bar, new sway bar extended sway bar end links,
two of these are gonna be for the rear.
Two are for the front.
And then workin' our way back,
got a differential skid plate here,
as well as these are all brackets for
differential drop to drop the differential down.
To help keep your CV angles
as flat as possible.
So differential drops,
that's, oh, obviously
we got our, might wanna,
lower control arm drop cross members,
as you can see, standard Rough Country finish
black on them.
That's pretty much gonna be it for the front.
And then in the back, these trucks
are not leaf spring like some of the other trucks
these are actually have a coil spring in the rear.
So in the rear to lift it rather than a block
which you're used to
they use this, which will be a coil spring spacer.
So it actually moves the coil spring down
it just does the same thing as a block pretty much.
And then this one is going to be with the
upgraded shocks rather than the
standard Rough Country shocks used on the Performance 2.2's.
They look pretty much the same from the outside,
but it's what's on the inside that counts.
Right?
And then, you know obviously
got a bunch of hardware here for everything.
There's gonna be, like I said before,
this is a coil spring truck in the rear,
so no blocks or U bolts,
simply coil spring spacer for the rear,
and then the shocks are gonna be for the rear,
since we're using the factory front strut.
They give you some break relocation brackets as well.
Everything you need to lift this truck four inches.
And that's pretty much it on this one.
That's gonna be four-inch Rough Country
for 2009 to '11 Dodge Ram 1500 trucks.
Alright, it's hot out here,
let's get the (bleep) out.
(hip hop beat)



For more infomation >> Congressman Criticized For Recording Video Inside Auschwitz Gas Chamber | NBC Nightly News - Duration: 1:50. 

Không có nhận xét nào:
Đăng nhận xét