Thứ Tư, 29 tháng 3, 2017

Waching daily Mar 29 2017

bigry sary kaam banaoda ALLAH ay by Agha Nusrat Ali Golarvi

bigry sary kaam banaoda ALLAH ay by Agha Nusrat Ali Golarvi

For more infomation >> bigry sary kaam banaoda ALLAH ay by Agha Nusrat Ali Golarvi - Duration: 7:02.

-------------------------------------------

Cyclomix high shear paddle mixer - Duration: 3:07.

Hello, my name is Allet Krug and I'm a senior application engineer at Hosokawa Micron B.V.

Hosokawa Micron B.V. is a manufacturer of mixing, drying and agglomeration equipment.

Today I would like to tell you something about our mixers.

In our mixing portfolio we've got low shear mixers

like our famous Vrieco-Nauta mixer, which is used for free-flowing powders,

for segregative powders and for pastes.

We've got mid-shear mixers and high shear mixers.

High shear mixers are being used for mixing cohesive powders.

Cohesive powders are powders which have inter-particle forces

which are keeping the particles together like magnets.

In order to break up those structures energy is needed.

For these powders our Cyclomix can be used.

This is our 5 litre Cyclomix, which means 5 litres of product.

The working principle of the Cyclomix is as follows:

It has got a central driven rotor, driven from the top.

The rotor will rotate at a speed of approximately 30 m/s.

At this speed the powder is being pushed outwards, due to the centrifugal forces.

Due to the angle in the vessel the product is climbing upwards

and is guided by the cover downwards again.

At the vessel wall we've got high shear forces

which is like rubbing your hands, you introduce heat.

That's why it can be equipped with a cooling jacket at the vessel and at the cover

in order to cool down there where the heat is being generated.

With the high shear forces at the vessel wall, a rolling effect of particles occurs.

This effect is being used in order to coat raw toner particles

with flow additives and charge controlling agents.

We will make a mixture of a white powder and iron oxide.

This mixture is ready in 30 seconds.

Due to the conical vessel it's easy to discharge the product.

The Cyclomix is successfully being used in for example

the ceramic, polymer, battery, cosmetics and pharmaceutical industry.

Would you like to know what the Cyclomix or any other mixer in our portfolio can do for you?

Challenge us with your mixing application!

Không có nhận xét nào:

Đăng nhận xét