Thứ Tư, 29 tháng 3, 2017

Waching daily Mar 29 2017

SHE'S DONE!

What Maxine Waters Just Admitted on the House Floor Will Have Her EXPELLED From Congress!

Rep. Maxine Waters (D-CA) went too far yesterday when she stood on the House floor and spewed

the most ANTI-American rant ever said by a U.S Representative.

Not only did she imply that white people are not as patriotic as black people, she also

admitted that she is using her role in Congress to fight against the good of the country and

take our president down, no matter what he does.

Waters openly stated that her goal as a Congresswoman is to "MAKE SURE THAT TRUMP DOES NOT REMAIN

PRESIDENT OF THE UNITED STATES"!

That is a threat against our president!

"My position against this president and his administration is clear," Waters said.

"I oppose this president.

I do not honor this president.

I do not respect this president."

Waters didn't just limit her hate to the president, she also attacked the American

people by claiming that Trump supporters are not patriotic!

Waters took it upon herself to speak for everyone in the black community and said,

"When we [black people] fight against this president, and we point out how dangerous

he is for this society and for this country, we're fighting for the democracy.

We're fighting for America.

We're saying to those who say they're patriotic but they've turned a blind eye

to the destruction that he's about to cause this country, 'You're not nearly as patriotic

as we are.'"

This is low even for a Democrat!

As an elected official, you are supposed to represent ALL the people, not just black democrats!

This woman is as vile and racist as they come!

Expulsion is the most serious form of disciplinary action that can be taken against a Member

of Congress.

Maxine Waters just PROVED that she is not fit to hold office and should be expelled

immediately!

For more infomation >> SHE'S DONE! What Maxine Waters Just Admitted on the House Floor - Duration: 2:05.

-------------------------------------------

WOW! The Reason Why Democrats Are BLOCKING Neil Gorsuch is SO STUPID It Actually HURTS! - Duration: 2:03.

WOW!

The Reason Why Democrats Are BLOCKING Neil Gorsuch is SO STUPID It Actually HURTS!

Neil Gorsuch is one of the most upstanding judges in the nation.

During his confirmation hearing, Gorsuch got personal and shared a bit of who he was.

His words silenced the entire room…

"People want to be remembered for the kindnesses they showed other people, by and large.

What I try to point out is, it's not how big your bank account balance is, nobody ever

puts that in their draft obituary, or that they billed the most hours, or that they won

the most cases.

It's how they treated other people along the way."

You would have to be out of your mind to disapprove of a man like Neil Gorsuch.

Unfortunately for Gorsuch, Democrats ARE completely out of their minds!

Democrats are claiming that Neil Gorsuch is unfit to serve because….wait for it….

HE FOLLOWS THE LAW OVER HIS FEELINGS!

Kamala Harris (D-CA) took to Twitter to explain why she will not support Trump's SCOTUS

pick.

"Judge Gorsuch has consistently valued narrow legalisms over real lives.

I cannot support his nomination." she wrote.

What she means is, she doesn't want a conservative judge who will actually follow the Constitution.

Harris even followed her asinine tweet with an even more ridiculous Op-ed.

In it she writes, "we have an obligation to also examine a

nominee's legal approach and ask whether he or she considers the impact of those decisions

on our society and the daily lives of our people."

Someone needs to inform Senator Harris that Supreme Court judges are not supposed to make

rulings using their personal feelings or morals.

Kamala Harris must be thinking of the liberal activist judges that Obama nominated over

the last 8 years.

Sorry sweetheart, Neil Gorsuch is a REAL judge!

For more infomation >> WOW! The Reason Why Democrats Are BLOCKING Neil Gorsuch is SO STUPID It Actually HURTS! - Duration: 2:03.

-------------------------------------------

TRUMP IS ON FIRE! What Ford Just Did In Michigan Will Have Trump Jumping With Joy! - Duration: 1:28.

TRUMP IS ON FIRE!

What Ford Just Did In Michigan Will Have Trump Jumping With Joy!

Ford is set to announce investments into manufacturing plants: it has a Michigan Assembly Plant,

a new Flat Rock Assembly Plant and a Romeo Engine Plant.

These new plans were announced on Tuesday morning.

According to the Detroit News, Ford Motors will announce investments int the 3 Michigan

manufacturing plants on Tuesday morning.

One source called the investments "significant."

This includes a promised $700 million investment that was decided on in 2015.

There is going to be a $9 billion investment through 2019 that'll result in 8,500 new

jobs.

Donald Trump won Michigan for a reason and he promised to bring back jobs.

These plans were decided on in 2015, but it is good to see a great American company follow

through on their plans to make this country great again because Trump is at the helm.

*** SHARE THIS and help us get this news out there!

The mainstream media is not going to want to give credit where credit is due.

Donald Trump is working to make this country great again.

SHARE this and give him an 'AMEN' in the comments! (h/t The Detroit News)

For more infomation >> TRUMP IS ON FIRE! What Ford Just Did In Michigan Will Have Trump Jumping With Joy! - Duration: 1:28.

-------------------------------------------

UNFORGIVABLE! What Liberals Just Did to Kellyanne Conway is BEYOND Sick! THEY MUST BE STOPPED! - Duration: 1:38.

UNFORGIVABLE!

What Liberals Just Did to Kellyanne Conway is BEYOND Sick!

THEY MUST BE STOPPED!

Modern day liberals have absolutely NO SHAME!

I mean sure, the hippy movement was bad, but these new ones make hippies look like nuns!

Don't believe me?

Just take a look at what they are doing to Kellyanne Conway, a HERO of women.

So some liberals were out browsing the web and came across THIS picture of actor Patrick

Stewart in drag:

Now, he did this back in 2016 and meant no harm by it.

However, the leftists decided "Oh, he looks kinda like Kellyanne Conway."

So what did they do with it?

The Democrats are now pushing Stewart and SNL to do new skits where he plays Kellyanne!

This is not just sad, it's plain disrespectful.

We are talking about a hard working mother of 3 who STILL found time and energy needed

to become the first woman EVER to manage a winning US Presidential campaign!

While SNL and Stewart have not confirmed anything, you can bet that the Leftist TROLLS are working

hard to make their dreams come true.

Now, there is nothing wrong with making fun of public figures if it's done FAIRLY, but

we all know SNL will not do that.

That's why we gotta fight back and protect Kellyanne Conway from their abuse.

The best ways to do this are STOP watching SNL and share this to let them know this is

one step TOO FAR!

For more infomation >> UNFORGIVABLE! What Liberals Just Did to Kellyanne Conway is BEYOND Sick! THEY MUST BE STOPPED! - Duration: 1:38.

-------------------------------------------

Unpacking & Assemble SH1 Track (with Eng Subs) - Duration: 4:30.

Here we have 2 types of Power Tracks

RH2, the recess type

and SH1, the surface mounted type.

Now, we are going to unpack them.

Here are the instruction manuals

And we will be starting off with

assembling SH1 Power Track

So, here is our SH1 Power Track.

See this blank cover?

Turn the track housing around,

simply push it to remove it from the housing.

Turn the track back to the front.

To remove the SFC3 modular track,

just slide the SFC3 modular track to the side,

turn the track housing over and

gently push the SFC3 modular track out.

Attach the backplates into the housing

And there you have it, the full set

components of SH1 track!

To assemble SH1, you need a phillip screwdriver.

Now slide the rubber protector to the left

to locate the end terminal.

Apply the same with the right side.

As when you slide the rubber protector off,

the end terminal is attached at the anchor of the track.

Get a flat-blade screwdriver to flip open

and hold the soft flap in position.

Insert the bit of the flat head screwdriver into the slot,

push down at 45 Degree angle to release from the catch.

Cross section of the latch and push backward.

The end terminal is removed.

Loosen the screws with phillips screwdriver,

and remove the end terminal cover.

There are indication of Live, Earth & Neutral

for incoming power connection.

Next place back the end terminal cover

and fasten the screws.

Once these screws are fastened,

fit the end terminal back into the anchor,

push it in all the way until a 'click' sound is heard.

The end terminal is secured in place.

Slide back the rubber protector back in place

to cover the end terminal

Then place the SFC3 modular track in correct position

within the housing and snap it down

Next, align the SFC3 modular track to the left.

Snap the blank plate back into the housing to complete.

Also, you will find a pack of screw caps.

Attach all these screw caps to the screw slots

which located at the side of the track housing.

For more infomation >> Unpacking & Assemble SH1 Track (with Eng Subs) - Duration: 4:30.

-------------------------------------------

😂THIS IS TOO FUNNY YOU GOTTA WATCH-Has America Become Dory The Fish😂 - Duration: 10:06.

😂 IS TOO FUNNY YOU GOTTA WATCH-Has America Become Dory The Fish😂

For more infomation >> 😂THIS IS TOO FUNNY YOU GOTTA WATCH-Has America Become Dory The Fish😂 - Duration: 10:06.

-------------------------------------------

Rain and lightning moving east, Austin area is now clear - Duration: 3:10.

TAKE CAUTION IF YOU DRIVE IN

THROUGH SOUTH BOSTON.

HERE IS DAVID.

DAVID: THANK YOU.

WE ARE STILL WATCHING THIS STORM

THAT BROUGHT SEVERE WEATHER

OVERNIGHT LOCALLY.

THE WORST WEATHER WAS OBSERVED

IN DALLAS-FORT WORTH.

THEY HAD A BRIEF TORNADO

WARNING.

I HAVE HAD REPORTS OF WIND

DAMAGE IN THAT AREA.

WE ARE STILL FEELING OF FACTS

FROM THIS STORM.

THE WORST OF IT HAS COME AND

GONE.

HERE IS WHAT YOU MISSED WHEN YOU

WERE ASLEEP.

THIS WAS THE BIG LINE OF STORMS

THAT WAS SEVERE.

IT WAS SEVERE IN MILAM

COUNTY.

NORTHERN ROCK L, 70 MILE PER

HOUR CONFIRMED WIND GUSTS.

THAT IS INCREDIBLE.

THESE COLORS DOWN

FROM AUSTIN

ARE JUST MINOR FREAK FLOOD

ADVISORIES.

WE WILL KEEP A CLOSE EYE ON THE

MINOR WATER CROSSINGS.

THERE IS STILL PLENTY OF RAIN

AND LIGHTNING.

THE WORST HAS COME AND GONE.

I HAVE MY EYE ON ONE STORM THAT

IS INTENSE MOVING INTO LOCKHART

AND EWING.

THIS HAS FREQUENT LIGHTNING.

I SAW HAIL UP TO

PING PONG

SIZE.

THE BIGGEST HAIL OUR RADAR IS

PICKING UP IS UP TO THE SIZE OF

A PENNY.

OUR RADAR IS TRACKING NOT THE

RAIN BUT THIS INTENSE STORM WITH

THE SMALL HAIL SURGING TO THE

NORTHEAST AT 50 MILES PER HOUR.

THAT WILL BE IN BASTROP AT

5:19.

EVEN THOUGH THE RAIN IS

CLEARING, THIS HEAVY RAIN IS

GOING TO HELP WITH OUR BOAT CAP

-- OAK COUNT.

WE MIGHT SEEM OLD GO UP A LITTLE

BIT -- SEE MOLD GO UP A LITTLE

BIT.

AS SOON AS 6:00, WE HAVE CLEAR

SKIES IN AUSTIN.

THE RISK OF ANY SEVERE

WEATHER

IS STILL PRESENT ENDING AROUND

SUNRISE.

WARM

WEATHER, JUST A DRAMATIC

TURNAROUND OVERNIGHT.

86 IS YOUR FORECAST WITH LOTS OF

SUNSHINE THROUGH THE AFTERNOON.

OVERNIGHT WE WILL SEE PLEASANTLY

COOL TEMPERATURES.

WE ARE BACK TO MARCH AVERAGES AT

56 DEGREES IN TOWN.

THAT MEANS 40'S FROM VERNON TO

FREDERICKSBURG.

AFTER THIS RAIN WRAPS UP IN THE

NEXT FEW HOURS, PLEASANT WEATHER

WITH SUNSHINE.

WE ARE WATCHING STORM WITH

ANOTHER RISK OF HEAVY RAIN AND

SEVERE WEATHER.

IT IS FOCUSING THE THREAT ON

SUNDAY.

THE LATEST INFORMATION FOR YOUR

SATURDAY OUTDOOR PLANS HAS ME

ADDING A CHANCE OF RAIN LATE IN

THE DAY SATURDAY.

For more infomation >> Rain and lightning moving east, Austin area is now clear - Duration: 3:10.

-------------------------------------------

Mobile money: How M-PESA is changing lives in Kibera - Duration: 1:51.

My name is George and I've lived here in Kibera for over 30 years

My name is Esther, I'm a business woman here in Kibera

M-PESA has changed my business so much

I just give the order through the phone and the goods are delivered to me

right here at my door

Here in Kibera we used to have problems with transactions of money

but with the introduction of M-PESA it has simplified the transaction of monies

M-PESA is the easiest way and quickest way to send money and to receive money

Compared to previously where somebody has to go to the bank and queue

so it has simplified the transaction of money

I use it for my parents at home

I can pay electricity bills

My business being paid my bills here

I can refuel my car

and pay also my bills using M-PESA

I can pay school fees

I use everything, almost everything, I use M-PESA

Safe - It's safe

M-PESA is very easy, faster and convinient

It's money at hand, money at your fingertips

I'm not far from somewhere where I can withdraw cash

So with M-PESA, woo, it's reliable and Iike it

For more infomation >> Mobile money: How M-PESA is changing lives in Kibera - Duration: 1:51.

-------------------------------------------

The 4 Stages of Learning in Business -- TTG011 - Duration: 5:32.

For more infomation >> The 4 Stages of Learning in Business -- TTG011 - Duration: 5:32.

-------------------------------------------

Future life with technology is good and beautiful. This is why I love the future. - Duration: 0:18.

My future life Cool!

Life Tech

Good future life

Attracted future tech

Attracted future tech

This is not just this!

For more infomation >> Future life with technology is good and beautiful. This is why I love the future. - Duration: 0:18.

-------------------------------------------

#fördetvidare - Sharing is caring - Punkapanik - Duration: 1:31.

For more infomation >> #fördetvidare - Sharing is caring - Punkapanik - Duration: 1:31.

-------------------------------------------

Nafpaktos Where Else? 30 sec AD - Duration: 0:31.

"Everyone likes to be guided, especially when travelling."

The view is breathtaking.

Mankind needs bridges, not walls.

Welcome to the City-Castle of Nafpaktos (Lepanto).

The mountains come down to the sea.

Who wants to go for a boat ride?

If there is a Big Ben in London, then there is a Seraphim in Nafpaktos!

I'll be happy to show you around.

Nafpaktos. Where else?

For more infomation >> Nafpaktos Where Else? 30 sec AD - Duration: 0:31.

-------------------------------------------

Unpacking & Assemble RH2 Track (with Eng Subs) - Duration: 3:17.

Here we have 2 types of Power Tracks.

RH2, the recess type;

and SH1, the surface mounted type.

Now, we are going to unpack them.

Here are the instruction manuals.

And we will be starting off with

assembling RH2 Power Track

So, here is our RH2 Power Track.

See this blank cover?

Turn the track housing around

Simply push it to remove it from the housing.

Turn the track back to the front.

And slide the SFC3 modular track slightly to the right

Turn the track over and gently push

to remove the SFC3 modular track.

And turn the housing to the front.

There you have it, the SFC3 modular track has

been seperated from the housing

With the back plates intact within the housing

To assemble RH2, you need a flat-blade screwdriver

Now slide the rubber protector to the left

to locate the end terminals

Apply the same with the right side.

As when you slide the rubber protector off,

The end terminal is attached at the anchor of the track.

Get a flat-blade screwdriver.

Insert the bit of the flat-blade screwdriver into the slot,

push down at 45 Degree angle to flip open

Cross section of the latch, hold the soft flap in position,

and push backward to release from the catch.

The end terminal is removed.

Next, loosen the screws with flat-blade screwdriver.

and remove the end terminal cover.

There are indication of Live, Earth & Neutral

for incoming power connection.

Next place back the end terminal cover

and fasten the screws

Once these screws are done fastened,

fit the end terminal back into the anchor.

Push it in all the way until a 'click' sound is heard.

The end terminal is secured in place.

Slide back the rubber protector back in place

to cover the end terminal

Then adjust the back plate accordingly

Place the SFC3 modular track in correct position

within the housing and snap it down.

And align the SFC3 modular track to the left.

Lastly, snap the blank plate back

into the track housing to complete.

For more infomation >> Unpacking & Assemble RH2 Track (with Eng Subs) - Duration: 3:17.

-------------------------------------------

Sberbank's Subsidiary is Leaving Ukraine - Duration: 3:59.

Sberbank is leaving the Ukrainian market.

It was announced on Tuesday, that they're selling their Ukrainian subsidiary

due to attacks from nationalists.

The buyers are a Latvian Norvik Banka and a Belarusian company,

owned by the British citizen, Said Gutseriev,

a son of Russneft's owner from Russia, Mikhail Gutseriev.

Said Gutseriev is the majority stockholder of the consortium.

This deal hasn't gone unnoticed in the Kremlin.

As the President's press-secretary Dmitry Peskov stated,

they pay close attention to the fate of all Russian in companies in Ukraine.

After all the latest events, Ukraine can now be considered

a country with zero investment reliability.

These word have already been confirmed by the investors, and not just the Russian ones.

Ukraine is being abandoned by those, who just recently promised

to support its economy with their dollars and euros.

Earlier, by indulging the nationalists and encouraging their blockade,

Kiev already deprived itself of Donbass coal.

And now, thanks to the radicals,

it's being deprived of an equally important fuel for the economy - investments.

Ekaterina Mironova is reporting from Kiev.

With all the hammering and drilling,

a part of Vladimirskaya street has been closed off with construction tape.

The wall, that's been the nationalists' pride for two weeks, is being taken apart block by block.

The blue-and-yellow tents are gone. The flyers are mostly taken down.

Here are the containers with solvent to remove the graffiti, left by the radicals.

There are no more flags or slogans here. The main location of Sberbank in Kiev is unblocked.

Today was the first work day.

The public utilities are also taking care of business

in Zaporozhye and Dnepropetrovsk.

The nationalists announced the end to the blockade of Sberbank's offices

before the subsidiaries were announced for sale.

However, radicals stated in an article that this was just the first step,

the second wave is coming.

The pause is needed only so that Ukrainians can withdraw their savings.

We're at war with Russia, not the Ukrainian citizens.

Even though we're surprised that people still trust their money

with the occupant's bank, 3 years into the war.

So we're going to unblock the locations of the Russian banks for a short period of time,

because we understand that their clients are regular people.

It's unclear whether the nationalists' plans have changed due to the sale of the bank.

Radicals have no comments on the issue.

But one thing is clear - attracting investors to Ukraine will be harder than ever.

The acute deficiency of foreign business in Kiev became obvious after Maidan.

In just two years, the country went from 76th to 85th spot

in the investment attractiveness rating.

Scared by the instability and political corruption, foreign companies leave one after another.

That's how the Tetra Pak packaging factory closed down in Kiev.

Two Finnish representatives also left - the paint manufacturer, Tikkurila and Ruukki.

Cushman & Wakefield, a consulting company, also closed their office.

Another good example is the energy providers.

We had plans for shale gas production.

We had the American Shell and Chevron, who planned to come here for shale gas production.

But ever since the events of 2014, plus a lack of economic feasibility for gas extraction,

they simply left.

That's just a small energy complex within Ukraine.

Aircraft engineering is considered a lucrative investment in Kiev.

Just two years ago they thought

that foreign businesses are so interested in this industry,

and that they're ready to invest big money.

For example, the Antonov plant was supposed to manufacture at least 50 planes per year.

But they are barely making ends meet.

Foreign investors remain indifferent towards Ukrainian rocket production,

shipyards, and high-technology industries.

Automotive industry has dropped by 40%.

Who needs investors, when the West is so enticing with its credits?

Ukrainian authorities, only in theory, create the required conditions for foreign business.

Kiev is way more eager to go into more debt.

But it's all very fragile here, too.

IMF has been thinking for over a week about another tranche.

Ekaterina Mironova, Ilya Kuzmin, Vesti, Ukraine, Kiev.

For more infomation >> Sberbank's Subsidiary is Leaving Ukraine - Duration: 3:59.

-------------------------------------------

This is Baboro - Duration: 2:21.

For more infomation >> This is Baboro - Duration: 2:21.

-------------------------------------------

SH1 Installation Guide (with Eng Subs) - Duration: 10:27.

Here's are the tools you needed for the installation.

Torpedo Measurement tool, hammer, cutter,

flat-blade screwdriver, phillips screwdriver, scissor, plier,

network patch tool and power drill. if you have powered,

cordless screwdriver, that's even better!

1st, use cutter to dig out the screw caps from socket.

ALERT: Please ensure that main power is switched OFF!

before proceeding to the next step.

Then unscrew the screws to remove the socket cover.

Once done unscrew, remove the socket cover

which exposed the 3 main wiring system.

As for the telephone socket, will have 1 cable attached.

Next, move on to the SH1 Power Track.

Remove the blank cover by gently push

out from the track housing.

Same applies to remove SFC3 track from track housing.

Take the housing track and place against the wall

to mark the mounting points' location using a pencil.

Once marking is done, drill the marked points

for cable entry & mounting opening.

Then use a plier to cut off the wiring cable

that attached to telephone socket and wall socket.

After detaching all the cables from the sockets,

tied up all the cables into bundle for easy management.

Bring the track housing against the wall and

place the Torpedo Measurement Tool at the track top

to balance the track location accordingly,

and pencil it to mark the exact mounting points on wall.

Next, drill the mounting points as marked

with a power drill.

Get some wall plugs and insert into all mounting

points, and hammer it to deepen

the wall plugs' insertion into the wall.

Get ready the screws and screwdriver, or powered type

Place the track housing against the wall according to the

mounting points' location and tighten the screws

to secure the housing onto the wall accordingly.

Now focus on SFC3 modular track part.

Slide the rubber strips to the either end

to locate the end terminal

Use a flat-blade screwdriver, flip open and

push backward to release the end terminal.

Lossen the screws using Phillips screwdriver

to open up the end terminal's cover.

Then cut & remove the cable entry blank

from the end terminal cover to suit the incoming cable.

Untie those cables to be ready for terminal fitting.

Trim the wire end to expose the inner copper strands.

However, you need to loosen the screws

of each wire terminals in order to fit the wire ends

into the respective terminals accordingly

using flat-blade screwdriver and fasten the screw back.

Apply the same to all 3 incoming power wires.

Then place the end terminal cover back .

and tighten the screws onto it.

After that, insert the end terminal back into the anchor;

by pushing it all the way until a 'click' is heard.

The end terminal is secured in place.

Slide back the rubber strips to cover the end terminal.

Place the SFC3 Modular Track in correct position

and snap it into the track housing by pressing in.

and slide the SFC3 Modular track to the right corner.

Tidy up the cable entry within the housing area

Trim the phone cable to expose inner copper strands.

And loop into 2 copper strands.

Then fit the phone cable to the data jack

according to the indicators shown at the data jack.

Trim all the excess wire strands

that are hanging out from the data jack.

Snap the top portion of the data jack on it

Then attach the data jack to the DS4 Data housing and snap it in.

and fit it in according to the slot provided.

Slowly push the cable into the track housing

and press the data housing onto the track housing.

Lastly, affix the blank plate

by snapping onto the track housing to complete.

Now you can switch on the main power

and simply plug in an Eubiq Adaptor for testing.

It is advisable to plug in

Eubiq SP3 Adaptor (Surge Protector)

to ensure 3 indicators are lighted

to confirm the installation is done correctly.

Không có nhận xét nào:

Đăng nhận xét