Waching daily Feb 2 2017

Learn Colors with Poop Coloring Pages for Kids and Children Educational Video

For more infomation >> Learn Colors with Poop Coloring Pages for Kids and Children Educational Video - Duration: 9:10.

-------------------------------------------

Traditional Chinese Music for Acupuncture (relaxing sounds) - Duration: 3:07:42.

Traditional Chinese Music for Acupuncture (relaxing sounds)

Traditional Chinese Music for Acupuncture (relaxing sounds)

Traditional Chinese Music for Acupuncture (relaxing sounds)

Traditional Chinese Music for Acupuncture (relaxing sounds)

For more infomation >> Traditional Chinese Music for Acupuncture (relaxing sounds) - Duration: 3:07:42.

-------------------------------------------

Hailey Baldwin flaunts her stunning figure in underwear for campaign - Duration: 1:57.

For more infomation >> Hailey Baldwin flaunts her stunning figure in underwear for campaign - Duration: 1:57.

-------------------------------------------

'Forget it,' London tells Scots who want second independence vote February 2, 2017 - Duration: 2:18.

'Forget it,' London tells Scots who want second independence vote

London will not help Scotland hold another referendum on seceding from the United Kingdom

before 2020, British defence minister Michael Fallon said on Thursday, prompting a row with

Scotland's pro-independence devolved government.

"Forget it," Fallon told the Herald Newspaper when asked whether he would facilitate a new

independence referendum following Scotland's vote last June to remain in the EU.

"(First Minister Nicola Sturgeon) ... has to respect the decision of Scotland to stay

inside the UK in 2014 and the decision of the UK to leave the EU.

Respect works two ways," he added.

Scots voted 55 to 44 percent to remain part of the UK in 2014 and Prime Minister Theresa

May has repeatedly said she does not believe there is a need for a second referendum.

Scotland, one of the United Kingdom's four nations, voted to keep its European Union

membership in last June's referendum while Britain as a whole voted to leave, prompting

renewed calls from Sturgeon's government for a re-run of the independence vote.

Sturgeon said on Twitter it would be a "disastrous move" for May's ruling Conservatives to block

an independence referendum.

A Scottish government spokesman said later: "Any Tory (Conservative) bid to block a referendum

would be a democratic outrage, but would only succeed in boosting support for both a referendum

and for independence itself – something which the Prime Minister has previously indicated

she understands all too well."

Support for Scottish independence is still at around 45 percent as it was in 2014, polls

indicate, despite Scotland now facing the prospect of Brexit.

For more infomation >> 'Forget it,' London tells Scots who want second independence vote February 2, 2017 - Duration: 2:18.

-------------------------------------------

For Honor - Controls and Combat Tutorial - Beginner Tips and Guide - Duration: 6:44.

Hello, and welcome to another For Honor breakdown video, today we're gonna be going through

the basic and advance combat control tutorial.

Use the left trigger to lock on to a target using Guard Mode.

This is going to be where you'll be spending a lot of your time, so get used to holding

down the left trigger.

To quickly switch between targets in guard mode, quickly release and then resume holding

left trigger.

The icon that appears over your Hero during guard mode indicates which direction you are

currently guarding and also which direction you would attack in.

Use the right stick to change your guard and attack direction.

You can only block an enemy if your guard is set to the same position as their attack.

It's time to test this with an AI.

Fortunately, he goes easy on me, but it the heat of battle when your health is low and

your opponent is coming at you, it can be difficult to stay on top of guarding in the

correct direction.

Thankfully the game assists you with the correct direction by giving you a red on screen alert

when an enemy attacks.

As mentioned earlier, it is only possible to land a hit and inflict decent damage to

your opponent if you attack in a direction they aren't guarding in.

Use the right stick to select the direction you wish to attack, and use either right bumper

for a light attack or right trigger for a heavy attack.

Switching between guard and attack stances between attacks is a good way to confuse your

opponent and make it more difficult for them to block your attacks.

It is also important to note something that isn't in the tutorial, Stamina.

Stamina is a green bar displayed below your characters white health bar, and is used to

execute attacks and other moves from different heroes.

Once you reach zero stamina, you enter a recover phase where the screen greys out and you move

slower, you are vulnerable in this mode and I would advise you resist the urge to press

the attack until you regain your stamina.

As you would expect, clicking the left stick in activates your sprint.

Sprint also counts as an execution condition for attacks, for example, every hero can perform

a running strike from sprinting by pressing either the light or heavy attack button depending

on the hero.

Here is a perfect example of how to capture zones during a dominion match, being inside

the zone which is indicated by white, allows you to capture it.

However if an enemy is also in the zone, you need to hunt them down and slay them in order

to start capturing the zone.

It looks like the battle has begun, time to show off what zone B is about.

Whilst in guard mode or free movement, you can use A to dodge roll.

AI soldiers can't be locked on to, so it's a simple matter of using light or heavy attacks

to mow them down.

Beware, they can get in the way at the worst of times and even kill you if you're caught

off guard.

I would recommend being vigilant whenever you are in zone B in case you are overwhelmed

by AI or a surprise attack from the enemy players.

In order to capture zone B, you need to clear the marked area of enemy soldiers, allowing

your forces to push forwards.

You can see there my weapon glowed slightly and I performed an area attack to take down

multiple soldiers, this is done by pressing both light and heavy attack buttons at the

same time.

Time for an example of the dodge ability.

Simply use the left stick to control the direction of your dodge and press A when the enemy begins

their attack to successfully dodge.

Similar to guarding, you can only dodge when your stance matches the attack of your opponent.

Here is something that is incredibly important during combat, and depending on the enemy,

can end up being the most annoying thing for honor.

Guard break.

Guard break is used to break through your opponents guard and land quick attacks ,You

can execute the guard break by pressing the x button when your enemy is guarding.

A red shield symbol flashes when a guard has been broken.

, it also enables you to execute a throw by pressing the x button again once the guard

has been broken, you can control the direction fo the throw with the left stick.

Throws can be fatal, as being pushed into walls will stun you, into soldiers or other

players will reduce your stamina, and into spikes or big drops will kill you.

As you can tell guard break sounds abit overpowered, fortunately it is possible to counter by using

an interrupt.

When an opponent initiates a guard break, press the x button the moment you see the

red shield symbol over your hero.

On to the Parry.

This is the more complicated version of a block.

The same rules apply regarding the direction of the stance, except you have to time a heavy

attack with your opponents attack to perform the parry.

Mastering the parry is vital to classes with low guard capabilities such as the berserker

or peacekeeper.

The parry is also a move execution condition, and can lead to some devastating counter attacks.

External blocking is how we managed to defend against multiple attackers, its as simple

as matching your guard stance to the direction the attack is coming from.

This can save your life when buying time for backup to arrive or when building your revenge

meter which you're about to see.

Once revenge is available, press Y to activate revenge mode.

If you time the activation to when you are close to an enemy, you can knock them to the

ground.

Revenge mode doesn't last long, but whilst active give your hero increased attack and

defence.

The common tactic when outnumbered is to block until revenge is up and attempt some epic

manoeuvres to kill your enemies.

Be sure to check out my channel for more for honor videos, see

you on the battlefield!

For more infomation >> For Honor - Controls and Combat Tutorial - Beginner Tips and Guide - Duration: 6:44.

-------------------------------------------

COLORS Mickey Mouse Vs Mickey Colors Cartoons for Kids Children Baby Talking Animals Fun Play - Duration: 7:40.

COLORS Mickey Mouse Vs Mickey Colors Cartoons for Kids Children Baby Talking Animals Fun Play

cats,pocoyo,بوبا,Cartoon,for kids,colors,learn colors,Animated,Animation,dessin animé,compilation,fun play,BAD BABY,Mickey Mouse,talking animals,coloring book,dog,el gato,funny cat,gold run,bear,episode 12,Educational,bebê,new episode,talking tom gold run,kids games,Full episode,para niños,Toddlers,buba,للأطفال,talking tom,الجني,talking ginger,videos para niños,funny,for children,episodes,children,funny cartoon,hd,3d,baby cartoons game,Talking Ben

For more infomation >> COLORS Mickey Mouse Vs Mickey Colors Cartoons for Kids Children Baby Talking Animals Fun Play - Duration: 7:40.

-------------------------------------------

Jasmin Walia trades her thighskimming floral dress for cream creation - Duration: 5:03.

For more infomation >> Jasmin Walia trades her thighskimming floral dress for cream creation - Duration: 5:03.

-------------------------------------------

Gaming Engines for Windows 8: 02 Game Assets - Duration: 1:01:28.

For more infomation >> Gaming Engines for Windows 8: 02 Game Assets - Duration: 1:01:28.

-------------------------------------------

Belding Schools narrows search for new mascot - Duration: 1:15.

3

3

PEOPLE WHO LIVE IN BELDING

HAVE A LIST OF MASCOTS TO PICK

FROM TODAY... FOR THEIR SCHOOL

DISTRICT.THE SCHOOL BOARD GOT

RID OF THE REDSKINS NAME LAST

YEAR.. AND ASKED FOR HELP

COMING UP WITH A TOP THREE.

THERE ARE TEN FINALISTS.

3

24 HOUR NEWS 8S KATHERINE

DUCHARME IS HERE WITH WHAT THE

PRINCIPAL IS SAYING AND WHERE

THEY STAND ON THE CHOICES.

KATHERINE --

3

TERESA -- THE PRINCIPAL TELLS

US THAT SURVEY THEY POSTED

ALREADY HAS DOZENS OF

RESPONSES.

3

AS THEY MOVE FORWARD WITH

PICKING A NEW MASCOT, THERE

ALREADY SEEMS TO BE A CROWD

FAVORITE.A LOT OF STUDENTS ARE

IN FAVOR OF THE BLACK

KNIGHTS...BUT IT'S NOT OVER

YET...AND THERE ARE 9 MORE

OPTIONS TO CHOOSE FROM.

3

ON YOUR SCREEN HERE IS THE

LIST OF TEN NAMES THAT BELDING

HAS NARROWED DOWN BY A STUDENT

COMMITTEE.THE PRINCIPAL TELLS

US THE SCHOOL MADE A MINDFUL

DECISION TO MAKE SURE THE NEW

NAMES AREN'T CONTROVERSIAL.

3

<YOU KNOW SOME OF THOSE ARE

PRETTY BENIGN. BLACK BEARS, I

DON'T THINK THAT THERE'S ANY

MALICE BEHIND THAT. BLACK

KNIGHTS HAS NOTHING TO DO WITH

RACE, REALLY THE HISTORY OF IT

GOES BACK TO THE ARMY CADETS.

3

THE SURVEY CLOSES AT MIDNIGHT

ON MONDAY.AFTER IT CLOSES, THE

SCHOOL WILL ORGANIZE BETWEEN

THREE AND FIVE TOP PICKS FROM

THE SURVEY BEFORE IT MAKES A

FINAL DECISION IN THE SPRING.

For more infomation >> Belding Schools narrows search for new mascot - Duration: 1:15.

-------------------------------------------

HOW TO MAKE YOUR OWN HANGING RING LIGHT FOR LESS THAN $30 - Duration: 15:59.

Hey guys welcome back to my Channel today I'm going to be showing you how I made this

hanging ring light.

This DIY project is easy.

It's great if you're on a budget, a college student, just starting out in Product Photography

or just starting a YouTube channel and best of all you can make this ring light for under

$30 and if you play your cards right, for under $25.

So without further ado, LET'S GO!

This is what you're going to need: Cardboard box, a wire wreath frame - mine

is 18 inches, you can go ahead and get a 12 (inch frame).

Daylight LED rope lights, zip ties - mine are 14 inches long, some aluminum foil, scissors,

a knife, marker or Sharpie, something to measure with like a measuring tape, muslin fabric

or wax paper, and a glue gun or Elmer's Glue.

First you'll need to just place your wire frame on your cardboard and draw an outline

of the wire wreath frame - the inner circle and the outer circle.

And you want to make sure that the circle wires are curving towards you.

And a good way to know this is if your Outer Circle is flush against your cardboard.

Next I use a knife to cut along the outline of the Inner Circle.

At this point I wasn't really sure what direction I would go.

You've probably seen other tutorials that cut out an entire ring, but I think I'm going

to go with something different so at this point I am only going to cut out the inner

circle of my cardboard.

Next I use the knife to clean up edges on the inner circle and the outer edges of the

cardboard.

This is entirely optional and if you want a ring-shaped backing for your light you can

go ahead and cut the ring out at this point.

Next I move on to my wire wreath and my rope lights.

And got my zip ties and just started to arrange my rope lights from the inside of a wire frame.

And I made sure that the end I was not going to attach to the outlet was what I started

with.

I am just using the zip ties to secure the rope light to the wire frame working from

the inner ring to the outer ring.

And I'm also using those wires that cross all the rings to help secure it as well.

I am also not tying the zip ties too tight because I don't want them to damage the lights.

As you can see I'm securing the zip ties and also using the wires that run perpendicular

to the rings to kind of anchor the zip ties as I secure the ropelight.

So here you can see how I just graduate to the next ring and securing the rope light

with the zip ties.

Notice that I have the zip ties all facing inward.

I just figured it would be easier to deal with cutting them and working with the zip

ties to keep them going in one direction and again like I said before, make sure that your

rings are curving out two words you from the wire wreath.

Once you get a hang of this part of the process you will get into a groove and it will go

smoothly, but it does take some time so you have to be patient.

All in all I would say that this entire project probably will take you between an hour and

an hour and a half maybe less if you are a bit more prepared and organized than I was.

And just remember you want the zip ties to secure the LED lights but you don't want to

make them too tight that they run the risk of damaging your LED bulbs.

So at this point you want to go ahead and just cut your zip ties.

I actually tried using the scissors but the spring back from it was just really painful

on my hands so I resorted to an old jewelry pliers and that got the job done much easier

for me.

Once I am done securing all my zip ties, I cut the ends off and just noticed that the

end of the rope lights that I am going to connect to the plug is hanging off slightly,

and you're not secured completely to the wire frame.

So my clever little mind had an idea and I decided not to do what I've seen other tutorials

do by cutting the cardboard ring out, and I was just going to work with what I had here

with just the inner circle cut out of the ring.

So next what I did was get some foil and just secure it to the cardboard by using some you

know by just laying down some lines of hot glue and laying the least reflective side

on to the glue.

Or have the most reflective side of the foil facing me.

And since nobody's really going to be seeing the back of this thing, I wasn't really too

concerned with making the back a certain way.

I just decided to cut the foil to just make it a little bit more flush against the curve

of the Inner Circle.

But that was really about it, and I just continued until the entire cardboard was covered in

foil.

Except for the strip at the top because I have a little idea for up there.

And here I am just making sure that the edge of the foil is secured at the back because

when I leave the muslin on it later I just want to make sure that it has a good footing

to secure it self to.

In hindsight I really would have cut that piece off the top, or made it shorter because

my goal is to make this ring light hangable, which it is and you'll see at the end.

But because of the length of the top piece it made it a little bit too long.

So here I am just putting a hole in the top where I will be putting a zip tie through

to secure the ring to the cardboard.

So here I am hot gluing another strip of cardboard to the top part of this contraption.

I did this to reinforce the strength of this top piece because I knew if I wanted to have

this DIY ring light hanging I would need to make where I'd be hanging it from stronger

so that the cardboard wouldn't eventually give way.

So next I started to secure the the wire wreath by sliding the zip ties between the rope light

and the wire frame, and securing it to the cardboard.

You're just going to see me do that a couple times - Top bottom left and right, just to

make sure that the ring light is stable.

So I made sure to go back and double up on the zip ties in the areas that I had secured

it to the cardboard.

Left, right, and the bottom.

So once you get all your zip ties secured, you could actually go ahead and just plug

your ring light in and just stop right here.

You'd have a pretty decent DIY ring light situation going on, but because I want this

to hang and I want it to diffuse the light more effectively I am going to take it a little

bit further.

So to sort out my hanging situation I go ahead and take my measuring tape and measure a few

inches in and make these marks even.

And then I go ahead and just punch some holes with my scissors, because what I am going

to do is take some zip ties and run them through these holes so that I can make this ring light

hangable.

But like I said in hindsight I would have made this part of my life shorter so that

it could hang a little bit higher.

I think part of that problem was that my wreath is 18 inches long as opposed to 12.

If I had a 12-inch wreath I think I would be set because this wouldn't be so long.

And any case if you do happen to try this and you do have a 12-inch Reece you should

be good to go.

There is my hanging contraption.

So This is actually a pretty neat idea if you are going to put a hook on your wall and

hang this from there, or put this on the back of your door for your filming, etc.

Yeah this works pretty good for that.

If you do decide to just go for the ring, you can probably just use zip ties and attach

them around your ring once everything is finished putting together and hang it from a hanger.

So no I'm just measuring out the muslin cloth and getting it situated so that I can cut

the right size off to cover the light.

I bought two yards and this is going to use just under one yard.

You don't necessarily need the measuring tape here for this because you can just place your

fabric on top and average out the size of fabric that you'll need.

But if you want to be a little bit more meticulous you can definitely use your measuring tape

to get this together.

I just went through and made sure to glue all the edges down up the fabric, and in the

process just secure any of the foil that wasn't glued down properly prior to this.

So at the bottom where I have the piece that connects to the plug I am just going to snip

the fabric a little bit and just try to finagle it and work it around so that that piece is

exposed so that it can connect to the wire that plugs into the outlet.

And here I'm just cleaning up the edge at the top on snipping off the extra fabric so

that I can glue it down and finish this off.

So the next thing I'm going to do is flip it over, and you just make a snip in the center

of the fabric so that I can cut the muslin cloth the fabric into pieces so that I can

have them glued to the back and just form like a snug cover over the lights.

So you just want to cut them almost like slices of a pie.

It doesn't really matter what shape they take, you just have to make sure you make them small

enough so that when you blew them they don't look baggy from the front and they just form

a nice snug cover like I mentioned before.

Once you get done securing and gluing down these pieces you just want to snip off any

extra bits of the fabric aren't glued down.

That's it!

Your DIY ring light is ready to go!

Don't leave just yet because next I'll be telling you what changes or different methods

you can use to get a better result for your hanging DIY ring light.

So I just wanted to show you what my results were with my DIY ring light.

This is what it looks like without the ring light.

Obviously this is the light off.

This is with the ring light.

This kind of balances out the orange tone of the regular lights in my house and I know

that when it is daylight out once I go into another area because I don't get any light

in my bathroom at all, but once I go into another area I should have better results

with it.

If you are into product photography like jewelry this should add, if you are able to rig it

up, this should help with the lighting.

So I'm just going to show you what it looks like with the lights off above and just the

ring later on.

And here you have it.

I think this is a pretty good result.

No you can definitely, like I said, go ahead and use wax paper like you've seen and other

tutorials.

I'll show you right now why what my thoughts are on what I have so far and what I would

change.

I just have the hanger and the zip ties and yeah.

So this piece here because it hangs so long and it's kind of below my face I actually

have to come down this way to see to be in the middle of it.

I would shorten that but I also realize that it is because of the fact.

this is an 18 inch wire frame.

So if you find a 12 inch frame you will be much better off in terms of the size and being

able because 12 inch wire frame would basically be like the inside of this right here.

So it'll be that small and if it were on this it would be higher anyway.

I don't know if that makes sense.

So for me another option that you have is actually putting the zip ties instead of having

this piece up here you can put the zip ties right here and to just have them at all four

corners so that you can rig it up however you want so that this piece that attaches

to your cord that plugs into the wall can be put on whichever side is closest to the

outlet or is more suitable for running your wire.

Or if you wanted to have it your zip ties actually attached around here, so if you didn't

have all this, and you just had the square, or you just did the ring, you could put zip

ties around the ring itself, kinda like how I have them wiring through here.

But you can put them around here and then have the zip ties that you put around here

be what you are going to suspend it from.

So the good thing about using the zip ties is that if you have like hooks over your door

you can actually just hook them onto the hooks and hang them from there.

So guys I hope you found this tutorial helpful.

If you did please give it a thumbs up!

Let me know in the comments if you're going to try it.

Let me know if you're going to rig it up differently from the other ring lights you've seen, or

what I've done here.

If you find any other hacks for making it hangable or suspendable

For more infomation >> HOW TO MAKE YOUR OWN HANGING RING LIGHT FOR LESS THAN $30 - Duration: 15:59.

-------------------------------------------

Korea's presidential hopefuls at glance after Ban Ki-moon's drop-out - Duration: 4:07.

"Obsolete and narrow-minded" were the words former UN chief Ban Ki-moon had for Korean

politicians... as he dropped out of the presidential race yesterday... to the surprise of many.

Our parliamentary correspondent Ji Myung-kil is in the studio.

Myung-kil, what do make out of Ban's move?

Right...

I was following former UN chief Ban Ki-moon the whole day as he met with leaders of the

political parties... and in the afternoon, when I was sitting in the Assembly's briefing

room,...

Ban suddenely appeared... and I remember looking at the other reporters,... thinking, "why

is he here?"... and that's when the announcement was made.

And of course... right after that we had immediate reactions from the political parties.

The two conservative parties who were trying to lure Ban were dumbfounded.

And the liberals,... maybe a sigh of relief?

But expressed respect for Ban's decision.

In his speech yesterday,... we could sense a great deal of disappointment on Ban's part.

He said he had "pure motives" and wanted to bring about change in Korea using the experiences

he had as the UN chief.

But he said he was downplayed and mocked by the media,... which he said was sad.

So, at this point, who is likely to be in presidential race, Myung-kil?

We do have more possible contenders waiting in the wings.

I had lunch with one lawmaker yesterday who is also thinking about running... but let

me just tell you:...

On the conservative side, for the ruling Saenuri Party... we don't have an obvious candidate

yet... but there are rumors that they might try to recruit the current Acting President

and Prime Minister Hwang Kyo-ahn.

As for the splinter conservative...

Bareun Party... we have Yoo Seong-min... who officially declared last week and Nam Kyung-pil,

Gyeonggi-do province governor.

On the liberal side... there's the former chief of the main opposition Democratic Party

of Korea Moon Jae-in... then there's An Hee-jung, the current governor of Chungcheongnam-do

province, and Lee Jae-myung, the current mayor of Seongnam.

And for the minor opposition parties... the People's Party has Ahn Cheol-soo, the former

business tycoon, and for the Justice Party, there's chairwoman Sim Sang-jeung.

Ban Ki-moon had been considered a relatively strong contender had he gone through with

his presidential bid.

But now that he's out... what do the chances look like for the others?

Well,... if we look at recent polls,... Moon Jae-in is in the lead among all presidential

hopefuls, with support above 30 percent.

He's followed by Hwang Kyo-ahn...

An Hee-jung...

Lee Jae-myung...

Ahn Cheol-soo and so forth.

Having Ban out of the race has created momentum for the liberals.

The ones who stand to gain are An Hee-jung and Ahn Cheol-soo.

That's because Ban's supporters were largely either from the western Chungcheong-do Provinces,

where An Hee-jung is governor, or were conservative voters looking for an alternative to the Saenuri

Party, which is where Ahn Cheol-soo comes in.

Pundits say that with no powerful alternative to represent the conservative camp... the

election may turn into a race between the opposition and the opposition.

As I said, Hwang Kyo-ahn, the acting president, is being tipped by many for a bid on a conservative

ticket, but he's neither confirmed or denied it.

Hwang is seen as the number two guy under President Park Geun-hye and thus sharing responsibility

for her failures.

So some Ban supporters who wanted political reform may avoid him.

Right Myung-kil, Thank-you for that insight.

Do keep us updated.

Sure.

For more infomation >> Korea's presidential hopefuls at glance after Ban Ki-moon's drop-out - Duration: 4:07.

-------------------------------------------

A Visit to IO Interactive - The Creators of Hitman - Duration: 29:56.

figgehn visits IO Interactive, The creators of Hitman

Hello and welcome to my channel

I am figgehn and I'm at IO Interactive in Copenhagen

IO Interactive, what do they do?

The are the Studio behind Hitman

I'm here to ask some questions, some of them are from my viewers

Well, I have now spent a whole day at IO Interactive

The creators of HITMAN

A quick reminder

31 January 2017

is the date when HITMAN will be availible in physical stores

I hoped you liked this video

Please leave a comment, press like and please subscribe

Good bye!

For more infomation >> A Visit to IO Interactive - The Creators of Hitman - Duration: 29:56.

-------------------------------------------

Gaming Engines for Windows 8: 01 Planning Your Game - Duration: 45:10.

For more infomation >> Gaming Engines for Windows 8: 01 Planning Your Game - Duration: 45:10.

-------------------------------------------

C# Fundamentals for Absolute Beginners: 06 Declaring Variables and Assigning Values... - Duration: 27:47.

For more infomation >> C# Fundamentals for Absolute Beginners: 06 Declaring Variables and Assigning Values... - Duration: 27:47.

-------------------------------------------

Court ends recovery program for Hanjin Shipping - Duration: 1:35.

One of the world's largest container carriers... and once Korea's largest...

Hanjin Shipping is offically now history.

Seoul court has decided to end its corporate turnaround and let it collapse.

Oh Jung-hee has the details.

Once Korea's largest, and the world's seventh largest shipping company,... Hanjin will soon

mark the end of its 40-year history.

The Seoul Central District Court announced on Thursday that it is terminating Hanjin's

recovery program and will declare the firm bankrupt on February 17th.

The ocean carrier has completed selling its major assets.

It's sold off its 54-percent stake in U.S. port operator Total Terminals International,

or TTI,... and it's sold its equipment-leasing subsidiary HTEC,... for a combined amount

of roughly 78 million U.S. dollars.

Twenty percent of TTI is now owned by Hyundai Merchant Marine -- and the rest by Swiss shipping

company MSC.

The news comes five months after Hanjin was put under court receivership last September,...

after its creditors rejected the firm's self-rescue plan and decided to end their financial support.

Hanjin's collapse was a shock to the global logistics industry, causing a massive impact

on retail and trade,... and leaving billions of dollars in cargo stranded at sea for weeks.

In December, accounting firm Samil PwC, appointed by the court to look into Hanjin's financial

condition,... recommended that it would make more sense to liquidate the shipping company

than to continue with the recovery program.

Oh Jung-hee, Arirang News.